/* xdelta 3 - delta compression tools and library * Copyright (C) 2001, 2003, 2004, 2005, 2006. Joshua P. MacDonald * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ------------------------------------------------------------------- Xdelta 3 The goal of this library is to to implement both the (stand-alone) data-compression and delta-compression aspects of VCDIFF encoding, and to support a programming interface that works like Zlib (http://www.gzip.org/zlib.html). See RFC3284: The VCDIFF Generic Differencing and Compression Data Format. VCDIFF is a unified encoding that combines data-compression and delta-encoding ("differencing"). VCDIFF has a detailed byte-code instruction set with many features. The instruction format supports an immediate size operand for small COPYs and ADDs (e.g., under 18 bytes). There are also instruction "modes", which are used to compress COPY addresses by using two address caches. An instruction mode refers to slots in the NEAR and SAME caches for recent addresses. NEAR remembers the previous 4 (by default) COPY addresses, and SAME catches frequent re-uses of the same address using a 3-way (by default) 256-entry associative cache of [ADDR mod 256], the encoded byte. A hit in the NEAR/SAME cache requires 0/1 ADDR bytes. VCDIFF has a default instruction table, but an alternate instruction tables may themselves be be delta-compressed and included in the encoding header. This allows even more freedom. There are 9 instruction modes in the default code table, 4 near, 3 same, VCD_SELF (absolute encoding) and VCD_HERE (relative to the current position). ---------------------------------------------------------------------- Algorithms Aside from the details of encoding and decoding, there are a bunch of algorithms needed. 1. STRING-MATCH. A two-level fingerprinting approach is used. A single loop computes the two checksums -- small and large -- at successive offsets in the TARGET file. The large checksum is more accurate and is used to discover SOURCE matches, which are potentially very long. The small checksum is used to discover copies within the TARGET. Small matching, which is more expensive, usually dominates the large STRING-MATCH costs in this code - the more exhaustive the search, the better the results. Either of the two string-matching mechanisms may be disabled. 2. INSTRUCTION SELECTION. The IOPT buffer here represents a queue used to store overlapping copy instructions. There are two possible optimizations that go beyond a greedy search. Both of these fall into the category of "non-greedy matching" optimizations. The first optimization stems from backward SOURCE-COPY matching. When a new SOURCE-COPY instruction covers a previous instruction in the target completely, it is erased from the queue. Randal Burns originally analyzed these algorithms and did a lot of related work (\cite the 1.5-pass algorithm). The second optimization comes by the encoding of common very-small COPY and ADD instructions, for which there are special DOUBLE-code instructions, which code two instructions in a single byte. The cost of bad instruction-selection overhead is relatively high for data-compression, relative to delta-compression, so this second optimization is fairly important. With "lazy" matching (the name used in Zlib for a similar optimization), the string-match algorithm searches after a match for potential overlapping copy instructions. In Xdelta and by default, VCDIFF, the minimum match size is 4 bytes, whereas Zlib searches with a 3-byte minimum. This feature, combined with double instructions, provides a nice challenge. Search in this file for "black magic", a heuristic. 3. STREAM ALIGNMENT. Stream alignment is needed to compress large inputs in constant space. See xd3_srcwin_move_point(). 4. WINDOW SELECTION. When the IOPT buffer flushes, in the first call to xd3_iopt_finish_encoding containing any kind of copy instruction, the parameters of the source window must be decided: the offset into the source and the length of the window. Since the IOPT buffer is finite, the program may be forced to fix these values before knowing the best offset/length. 5. SECONDARY COMPRESSION. VCDIFF supports a secondary encoding to be applied to the individual sections of the data format, which are ADDRess, INSTruction, and DATA. Several secondary compressor variations are implemented here, although none is standardized yet. One is an adaptive huffman algorithm -- the FGK algorithm (Faller, Gallager, and Knuth, 1985). This compressor is extremely slow. The other is a simple static Huffman routine, which is the base case of a semi-adaptive scheme published by D.J. Wheeler and first widely used in bzip2 (by Julian Seward). This is a very interesting algorithm, originally published in nearly cryptic form by D.J. Wheeler. !!!NOTE!!! Because these are not standardized, secondary compression remains off by default. ftp://ftp.cl.cam.ac.uk/users/djw3/bred3.{c,ps} -------------------------------------------------------------------- Other Features 1. USER CONVENIENCE For user convenience, it is essential to recognize Gzip-compressed files and automatically Gzip-decompress them prior to delta-compression (or else no delta-compression will be achieved unless the user manually decompresses the inputs). The compressed represention competes with Xdelta, and this must be hidden from the command-line user interface. The Xdelta-1.x encoding was simple, not compressed itself, so Xdelta-1.x uses Zlib internally to compress the representation. This implementation supports external compression, which implements the necessary fork() and pipe() mechanics. There is a tricky step involved to support automatic detection of a compressed input in a non-seekable input. First you read a bit of the input to detect magic headers. When a compressed format is recognized, exec() the external compression program and create a second child process to copy the original input stream. [Footnote: There is a difficulty related to using Gzip externally. It is not possible to decompress and recompress a Gzip file transparently. If FILE.GZ had a cryptographic signature, then, after: (1) Gzip-decompression, (2) Xdelta-encoding, (3) Gzip-compression the signature could be broken. The only way to solve this problem is to guess at Gzip's compression level or control it by other means. I recommend that specific implementations of any compression scheme store information needed to exactly re-compress the input, that way external compression is transparent - however, this won't happen here until it has stabilized.] 2. APPLICATION-HEADER This feature was introduced in RFC3284. It allows any application to include a header within the VCDIFF file format. This allows general inter-application data exchange with support for application-specific extensions to communicate metadata. 3. VCDIFF CHECKSUM An optional checksum value is included with each window, which can be used to validate the final result. This verifies the correct source file was used for decompression as well as the obvious advantage: checking the implementation (and underlying) correctness. 4. LIGHT WEIGHT The code makes efforts to avoid copying data more than necessary. The code delays many initialization tasks until the first use, it optimizes for identical (perfectly matching) inputs. It does not compute any checksums until the first lookup misses. Memory usage is reduced. String-matching is templatized (by slightly gross use of CPP) to hard-code alternative compile-time defaults. The code has few outside dependencies. ---------------------------------------------------------------------- The default rfc3284 instruction table: (see RFC for the explanation) TYPE SIZE MODE TYPE SIZE MODE INDEX -------------------------------------------------------------------- 1. Run 0 0 Noop 0 0 0 2. Add 0, [1,17] 0 Noop 0 0 [1,18] 3. Copy 0, [4,18] 0 Noop 0 0 [19,34] 4. Copy 0, [4,18] 1 Noop 0 0 [35,50] 5. Copy 0, [4,18] 2 Noop 0 0 [51,66] 6. Copy 0, [4,18] 3 Noop 0 0 [67,82] 7. Copy 0, [4,18] 4 Noop 0 0 [83,98] 8. Copy 0, [4,18] 5 Noop 0 0 [99,114] 9. Copy 0, [4,18] 6 Noop 0 0 [115,130] 10. Copy 0, [4,18] 7 Noop 0 0 [131,146] 11. Copy 0, [4,18] 8 Noop 0 0 [147,162] 12. Add [1,4] 0 Copy [4,6] 0 [163,174] 13. Add [1,4] 0 Copy [4,6] 1 [175,186] 14. Add [1,4] 0 Copy [4,6] 2 [187,198] 15. Add [1,4] 0 Copy [4,6] 3 [199,210] 16. Add [1,4] 0 Copy [4,6] 4 [211,222] 17. Add [1,4] 0 Copy [4,6] 5 [223,234] 18. Add [1,4] 0 Copy 4 6 [235,238] 19. Add [1,4] 0 Copy 4 7 [239,242] 20. Add [1,4] 0 Copy 4 8 [243,246] 21. Copy 4 [0,8] Add 1 0 [247,255] -------------------------------------------------------------------- Reading the source: Overview This file includes itself in several passes to macro-expand certain sections with variable forms. Just read ahead, there's only a little confusion. I know this sounds ugly, but hard-coding some of the string-matching parameters results in a 10-15% increase in string-match performance. The only time this hurts is when you have unbalanced #if/endifs. A single compilation unit tames the Makefile. In short, this is to allow the above-described hack without an explodingMakefile. The single compilation unit includes the core library features, configurable string-match templates, optional main() command-line tool, misc optional features, and a regression test. Features are controled with CPP #defines, see Makefile.am. The initial __XDELTA3_C_HEADER_PASS__ starts first, the INLINE and TEMPLATE sections follow. Easy stuff first, hard stuff last. Optional features include: xdelta3-main.h The command-line interface, external compression support, POSIX-specific, info & VCDIFF-debug tools. xdelta3-second.h The common secondary compression routines. xdelta3-decoder.h All decoding routines. xdelta3-djw.h The semi-adaptive huffman secondary encoder. xdelta3-fgk.h The adaptive huffman secondary encoder. xdelta3-test.h The unit test covers major algorithms, encoding and decoding. There are single-bit error decoding tests. There are 32/64-bit file size boundary tests. There are command-line tests. There are compression tests. There are external compression tests. There are string-matching tests. There should be more tests... Additional headers include: xdelta3.h The public header file. xdelta3-cfgs.h The default settings for default, built-in encoders. These are hard-coded at compile-time. There is also a single soft-coded string matcher for experimenting with arbitrary values. xdelta3-list.h A cyclic list template Misc little debug utilities: badcopy.c Randomly modifies an input file based on two parameters: (1) the probability that a byte in the file is replaced with a pseudo-random value, and (2) the mean change size. Changes are generated using an expoential distribution which approximates the expected error_prob distribution. -------------------------------------------------------------------- This file itself is unusually large. I hope to defend this layout with lots of comments. Everything in this file is related to encoding and decoding. I like it all together - the template stuff is just a hack. */ #ifndef __XDELTA3_C_HEADER_PASS__ #define __XDELTA3_C_HEADER_PASS__ #include #include #include "xdelta3.h" /****************************************************************************************** STATIC CONFIGURATION ******************************************************************************************/ #ifndef XD3_MAIN /* the main application */ #define XD3_MAIN 0 #endif #ifndef VCDIFF_TOOLS #define VCDIFF_TOOLS XD3_MAIN #endif #ifndef SECONDARY_FGK /* one from the algorithm preservation department: */ #define SECONDARY_FGK 0 /* adaptive Huffman routines */ #endif #ifndef SECONDARY_DJW /* semi-adaptive/static Huffman for the eventual */ #define SECONDARY_DJW 0 /* standardization, off by default until such time. */ #endif #ifndef GENERIC_ENCODE_TABLES /* These three are the RFC-spec'd app-specific */ #define GENERIC_ENCODE_TABLES 0 /* code features. This is tested but not recommended */ #endif /* unless there's a real application. */ #ifndef GENERIC_ENCODE_TABLES_COMPUTE #define GENERIC_ENCODE_TABLES_COMPUTE 0 #endif #ifndef GENERIC_ENCODE_TABLES_COMPUTE_PRINT #define GENERIC_ENCODE_TABLES_COMPUTE_PRINT 0 #endif #if XD3_USE_LARGEFILE64 /* How does everyone else do this? */ #ifndef WIN32 #define Q "q" #else #define Q "I64" #endif #else #define Q #endif #if XD3_ENCODER #define IF_ENCODER(x) x #else #define IF_ENCODER(x) #endif /******************************************************************************************/ typedef enum { /* header indicator bits */ VCD_SECONDARY = (1 << 0), /* uses secondary compressor */ VCD_CODETABLE = (1 << 1), /* supplies code table data */ VCD_APPHEADER = (1 << 2), /* supplies application data */ VCD_INVHDR = ~7U, /* window indicator bits */ VCD_SOURCE = (1 << 0), /* copy window in source file */ VCD_TARGET = (1 << 1), /* copy window in target file */ VCD_ADLER32 = (1 << 2), /* has adler32 checksum */ VCD_INVWIN = ~7U, VCD_SRCORTGT = VCD_SOURCE | VCD_TARGET, /* delta indicator bits */ VCD_DATACOMP = (1 << 0), VCD_INSTCOMP = (1 << 1), VCD_ADDRCOMP = (1 << 2), VCD_INVDEL = ~0x7U, } xd3_indicator; typedef enum { VCD_DJW_ID = 1, VCD_FGK_ID = 16, /* !!!Note: these are not a standard IANA-allocated ID!!! */ } xd3_secondary_ids; typedef enum { SEC_NOFLAGS = 0, SEC_COUNT_FREQS = (1 << 0), /* OPT: Not implemented: Could eliminate first pass of Huffman... */ } xd3_secondary_flags; typedef enum { DATA_SECTION, /* These indicate which section to the secondary compressor. */ INST_SECTION, /* The header section is not compressed, therefore not listed here. */ ADDR_SECTION, } xd3_section_type; typedef enum { XD3_NOOP = 0, XD3_ADD = 1, XD3_RUN = 2, XD3_CPY = 3, /* XD3_CPY rtypes are represented as (XD3_CPY + copy-mode value) */ } xd3_rtype; /******************************************************************************************/ #include "xdelta3-list.h" XD3_MAKELIST(xd3_rlist, xd3_rinst, link); /******************************************************************************************/ #ifndef unlikely /* The unlikely macro - any good? */ #if defined(__GNUC__) && __GNUC__ >= 3 #define unlikely(x) __builtin_expect((x),0) #define likely(x) __builtin_expect((x),1) #else #define unlikely(x) (x) #define likely(x) (x) #endif #endif #define SECONDARY_MIN_SAVINGS 2 /* Secondary compression has to save at least this many bytes. */ #define SECONDARY_MIN_INPUT 10 /* Secondary compression needs at least this many bytes. */ #define VCDIFF_MAGIC1 0xd6 /* 1st file byte */ #define VCDIFF_MAGIC2 0xc3 /* 2nd file byte */ #define VCDIFF_MAGIC3 0xc4 /* 3rd file byte */ #define VCDIFF_VERSION 0x00 /* 4th file byte */ #define VCD_SELF 0 /* 1st address mode */ #define VCD_HERE 1 /* 2nd address mode */ #define CODE_TABLE_STRING_SIZE (6 * 256) /* Should fit a code table string. */ #define CODE_TABLE_VCDIFF_SIZE (6 * 256) /* Should fit a compressed code table string */ #define SECONDARY_ANY (SECONDARY_DJW || SECONDARY_FGK) /* True if any secondary compressor is used. */ #define ALPHABET_SIZE 256 /* Used in test code--size of the secondary compressor alphabet. */ #define HASH_PRIME 0 /* Old hashing experiments */ #define HASH_PERMUTE 1 #define ARITH_SMALL_CKSUM 1 #define HASH_CKOFFSET 1U /* Table entries distinguish "no-entry" from offset 0 using this offset. */ #define MIN_SMALL_LOOK 2U /* Match-optimization stuff. */ #define MIN_LARGE_LOOK 2U #define MIN_MATCH_OFFSET 1U #define MAX_MATCH_SPLIT 18U /* VCDIFF code table: 18 is the default limit for direct-coded ADD sizes */ #define LEAST_MATCH_INCR 0 /* The least number of bytes an overlapping match must beat * the preceding match by. This is a bias for the lazy * match optimization. A non-zero value means that an * adjacent match has to be better by more than the step * between them. 0. */ #define MIN_MATCH 4U /* VCDIFF code table: MIN_MATCH=4 */ #define MIN_ADD 1U /* 1 */ #define MIN_RUN 8U /* The shortest run, if it is shorter than this an immediate * add/copy will be just as good. ADD1/COPY6 = 1I+1D+1A bytes, * RUN18 = 1I+1D+1A. */ #define MAX_MODES 9 /* Maximum number of nodes used for compression--does not limit decompression. */ #define ENC_SECTS 4 /* Number of separate output sections. */ #define HDR_TAIL(s) (stream->enc_tails[0]) #define DATA_TAIL(s) (stream->enc_tails[1]) #define INST_TAIL(s) (stream->enc_tails[2]) #define ADDR_TAIL(s) (stream->enc_tails[3]) #define HDR_HEAD(s) (stream->enc_heads[0]) #define DATA_HEAD(s) (stream->enc_heads[1]) #define INST_HEAD(s) (stream->enc_heads[2]) #define ADDR_HEAD(s) (stream->enc_heads[3]) #define SIZEOF_ARRAY(x) (sizeof(x) / sizeof(x[0])) #define TOTAL_MODES(x) (2+(x)->acache.s_same+(x)->acache.s_near) /* Template instances. */ #if XD3_BUILD_SLOW #define IF_BUILD_SLOW(x) x #else #define IF_BUILD_SLOW(x) #endif #if XD3_BUILD_FAST #define IF_BUILD_FAST(x) x #else #define IF_BUILD_FAST(x) #endif #if XD3_BUILD_FASTEST #define IF_BUILD_FASTEST(x) x #else #define IF_BUILD_FASTEST(x) #endif #if XD3_BUILD_SOFT #define IF_BUILD_SOFT(x) x #else #define IF_BUILD_SOFT(x) #endif #if XD3_BUILD_DEFAULT #define IF_BUILD_DEFAULT(x) x #else #define IF_BUILD_DEFAULT(x) #endif IF_BUILD_SOFT(static const xd3_smatcher __smatcher_soft;) IF_BUILD_FAST(static const xd3_smatcher __smatcher_fast;) IF_BUILD_SLOW(static const xd3_smatcher __smatcher_slow;) IF_BUILD_FASTEST(static const xd3_smatcher __smatcher_fastest;) IF_BUILD_DEFAULT(static const xd3_smatcher __smatcher_default;) #if XD3_DEBUG #define SMALL_HASH_DEBUG1(s,inp) \ usize_t debug_hval = xd3_checksum_hash (& (s)->small_hash, \ xd3_scksum ((inp), (s)->smatcher.small_look)) #define SMALL_HASH_DEBUG2(s,inp) \ XD3_ASSERT (debug_hval == xd3_checksum_hash (& (s)->small_hash, \ xd3_scksum ((inp), (s)->smatcher.small_look))) #else #define SMALL_HASH_DEBUG1(s,inp) #define SMALL_HASH_DEBUG2(s,inp) #endif /* XD3_DEBUG */ /* Update the run-length state */ #define NEXTRUN(c) do { if ((c) == run_c) { run_l += 1; } else { run_c = (c); run_l = 1; } } while (0) /* Update the checksum state. */ #define LARGE_CKSUM_UPDATE(cksum,base,look) \ do { \ uint32_t old_c = PERMUTE((base)[0]); \ uint32_t new_c = PERMUTE((base)[(look)]); \ uint32_t low = (((cksum) & 0xffff) - old_c + new_c) & 0xffff; \ uint32_t high = (((cksum) >> 16) - (old_c * (look)) + low) & 0xffff; \ (cksum) = (high << 16) | low; \ } while (0) /* Multiply and add hash function */ #if ARITH_SMALL_CKSUM #define SMALL_CKSUM_UPDATE(cksum,base,look) (cksum) = ((*(unsigned long*)(base+1)) * 71143) #else #define SMALL_CKSUM_UPDATE LARGE_CKSUM_UPDATE #endif /* Consume N bytes of input, only used by the decoder. */ #define DECODE_INPUT(n) \ do { \ stream->total_in += (xoff_t) (n); \ stream->avail_in -= (n); \ stream->next_in += (n); \ } while (0) /* This CPP-conditional stuff can be cleaned up... */ #if XD3_DEBUG #define IF_DEBUG(x) x #define DEBUG_ARG(x) , x #else #define IF_DEBUG(x) #define DEBUG_ARG(x) #endif #if XD3_DEBUG > 1 #define IF_DEBUG1(x) x #else #define IF_DEBUG1(x) #endif #if XD3_DEBUG > 2 #define IF_DEBUG2(x) x #else #define IF_DEBUG2(x) #endif #if REGRESSION_TEST #define IF_REGRESSION(x) x #else #define IF_REGRESSION(x) #endif /******************************************************************************************/ #if XD3_ENCODER static void* xd3_alloc0 (xd3_stream *stream, usize_t elts, usize_t size); static xd3_output* xd3_alloc_output (xd3_stream *stream, xd3_output *old_output); static int xd3_alloc_iopt (xd3_stream *stream, int elts); static void xd3_free_output (xd3_stream *stream, xd3_output *output); static int xd3_emit_byte (xd3_stream *stream, xd3_output **outputp, uint8_t code); static int xd3_emit_bytes (xd3_stream *stream, xd3_output **outputp, const uint8_t *base, usize_t size); static int xd3_emit_double (xd3_stream *stream, xd3_rinst *first, xd3_rinst *second, uint code); static int xd3_emit_single (xd3_stream *stream, xd3_rinst *single, uint code); static usize_t xd3_sizeof_output (xd3_output *output); static int xd3_source_match_setup (xd3_stream *stream, xoff_t srcpos); static int xd3_source_extend_match (xd3_stream *stream); static int xd3_srcwin_setup (xd3_stream *stream); static usize_t xd3_iopt_last_matched (xd3_stream *stream); static int xd3_emit_uint32_t (xd3_stream *stream, xd3_output **output, uint32_t num); #endif /* XD3_ENCODER */ static int xd3_decode_allocate (xd3_stream *stream, usize_t size, uint8_t **copied1, usize_t *alloc1, uint8_t **copied2, usize_t *alloc2); static void xd3_compute_code_table_string (const xd3_dinst *code_table, uint8_t *str); static void* xd3_alloc (xd3_stream *stream, usize_t elts, usize_t size); static void xd3_free (xd3_stream *stream, void *ptr); static int xd3_read_uint32_t (xd3_stream *stream, const uint8_t **inpp, const uint8_t *max, uint32_t *valp); #if REGRESSION_TEST static int xd3_selftest (void); #endif /******************************************************************************************/ #define UINT32_OFLOW_MASK 0xfe000000U #define UINT64_OFLOW_MASK 0xfe00000000000000ULL #ifndef UINT32_MAX #define UINT32_MAX 4294967295U #endif #ifndef UINT64_MAX #define UINT64_MAX 18446744073709551615ULL #endif #if SIZEOF_USIZE_T == 4 #define USIZE_T_MAX UINT32_MAX #define xd3_decode_size xd3_decode_uint32_t #define xd3_emit_size xd3_emit_uint32_t #define xd3_sizeof_size xd3_sizeof_uint32_t #define xd3_read_size xd3_read_uint32_t #elif SIZEOF_USIZE_T == 8 #define USIZE_T_MAX UINT64_MAX #define xd3_decode_size xd3_decode_uint64_t #define xd3_emit_size xd3_emit_uint64_t #define xd3_sizeof_size xd3_sizeof_uint64_t #define xd3_read_size xd3_read_uint64_t #endif #if SIZEOF_XOFF_T == 4 #define XOFF_T_MAX UINT32_MAX #define xd3_decode_offset xd3_decode_uint32_t #define xd3_emit_offset xd3_emit_uint32_t #elif SIZEOF_XOFF_T == 8 #define XOFF_T_MAX UINT64_MAX #define xd3_decode_offset xd3_decode_uint64_t #define xd3_emit_offset xd3_emit_uint64_t #endif #define USIZE_T_OVERFLOW(a,b) ((USIZE_T_MAX - (usize_t) (a)) < (usize_t) (b)) #define XOFF_T_OVERFLOW(a,b) ((XOFF_T_MAX - (xoff_t) (a)) < (xoff_t) (b)) const char* xd3_strerror (int ret) { switch (ret) { case XD3_INPUT: return "XD3_INPUT"; case XD3_OUTPUT: return "XD3_OUTPUT"; case XD3_GETSRCBLK: return "XD3_GETSRCBLK"; case XD3_GOTHEADER: return "XD3_GOTHEADER"; case XD3_WINSTART: return "XD3_WINSTART"; case XD3_WINFINISH: return "XD3_WINFINISH"; case XD3_TOOFARBACK: return "XD3_TOOFARBACK"; case XD3_INTERNAL: return "XD3_INTERNAL"; } return NULL; } /******************************************************************************************/ #if SECONDARY_ANY == 0 #define IF_SEC(x) #define IF_NSEC(x) x #else /* yuck */ #define IF_SEC(x) x #define IF_NSEC(x) #include "xdelta3-second.h" #endif /* SECONDARY_ANY */ #if SECONDARY_FGK #include "xdelta3-fgk.h" static const xd3_sec_type fgk_sec_type = { VCD_FGK_ID, "FGK Adaptive Huffman", SEC_NOFLAGS, (xd3_sec_stream* (*)()) fgk_alloc, (void (*)()) fgk_destroy, (void (*)()) fgk_init, (int (*)()) xd3_decode_fgk, IF_ENCODER((int (*)()) xd3_encode_fgk) }; #define IF_FGK(x) x #define FGK_CASE(s) \ s->sec_type = & fgk_sec_type; \ break; #else #define IF_FGK(x) #define FGK_CASE(s) \ s->msg = "unavailable secondary compressor: FGK Adaptive Huffman"; \ return XD3_INTERNAL; #endif #if SECONDARY_DJW #include "xdelta3-djw.h" static const xd3_sec_type djw_sec_type = { VCD_DJW_ID, "Static Huffman", SEC_COUNT_FREQS, (xd3_sec_stream* (*)()) djw_alloc, (void (*)()) djw_destroy, (void (*)()) djw_init, (int (*)()) xd3_decode_huff, IF_ENCODER((int (*)()) xd3_encode_huff) }; #define IF_DJW(x) x #define DJW_CASE(s) \ s->sec_type = & djw_sec_type; \ break; #else #define IF_DJW(x) #define DJW_CASE(s) \ s->msg = "unavailable secondary compressor: DJW Static Huffman"; \ return XD3_INTERNAL; #endif /******************************************************************************************/ /* Process the inline pass. */ #define __XDELTA3_C_INLINE_PASS__ #include "xdelta3.c" #undef __XDELTA3_C_INLINE_PASS__ /* Process template passes - this includes xdelta3.c several times. */ #define __XDELTA3_C_TEMPLATE_PASS__ #include "xdelta3-cfgs.h" #undef __XDELTA3_C_TEMPLATE_PASS__ #if XD3_MAIN || PYTHON_MODULE || SWIG_MODULE #include "xdelta3-main.h" #endif #if REGRESSION_TEST #include "xdelta3-test.h" #endif #if PYTHON_MODULE #include "xdelta3-python.h" #endif #endif /* __XDELTA3_C_HEADER_PASS__ */ #ifdef __XDELTA3_C_INLINE_PASS__ /****************************************************************************************** Instruction tables ******************************************************************************************/ /* The following code implements a parametrized description of the * code table given above for a few reasons. It is not necessary for * implementing the standard, to support compression with variable * tables, so an implementation is only required to know the default * code table to begin decompression. (If the encoder uses an * alternate table, the table is included in compressed form inside * the VCDIFF file.) * * Before adding variable-table support there were two functions which * were hard-coded to the default table above. * xd3_compute_default_table() would create the default table by * filling a 256-elt array of xd3_dinst values. The corresponding * function, xd3_choose_instruction(), would choose an instruction * based on the hard-coded parameters of the default code table. * * Notes: The parametrized code table description here only generates * tables of a certain regularity similar to the default table by * allowing to vary the distribution of single- and * double-instructions and change the number of near and same copy * modes. More exotic tables are only possible by extending this * code. * * For performance reasons, both the parametrized and non-parametrized * versions of xd3_choose_instruction remain. The parametrized * version is only needed for testing multi-table decoding support. * If ever multi-table encoding is required, this can be optimized by * compiling static functions for each table. */ /* The XD3_CHOOSE_INSTRUCTION calls xd3_choose_instruction with the * table description when GENERIC_ENCODE_TABLES are in use. The * IF_GENCODETBL macro enables generic-code-table specific code. */ #if GENERIC_ENCODE_TABLES #define XD3_CHOOSE_INSTRUCTION(stream,prev,inst) xd3_choose_instruction (stream->code_table_desc, prev, inst) #define IF_GENCODETBL(x) x #else #define XD3_CHOOSE_INSTRUCTION(stream,prev,inst) xd3_choose_instruction (prev, inst) #define IF_GENCODETBL(x) #endif /* This structure maintains information needed by * xd3_choose_instruction to compute the code for a double instruction * by first indexing an array of code_table_sizes by copy mode, then * using (offset + (muliplier * X)) */ struct _xd3_code_table_sizes { uint8_t cpy_max; uint8_t offset; uint8_t mult; }; /* This contains a complete description of a code table. */ struct _xd3_code_table_desc { /* Assumes a single RUN instruction */ /* Assumes that MIN_MATCH is 4 */ uint8_t add_sizes; /* Number of immediate-size single adds (default 17) */ uint8_t near_modes; /* Number of near copy modes (default 4) */ uint8_t same_modes; /* Number of same copy modes (default 3) */ uint8_t cpy_sizes; /* Number of immediate-size single copies (default 15) */ uint8_t addcopy_add_max; /* Maximum add size for an add-copy double instruction, all modes (default 4) */ uint8_t addcopy_near_cpy_max; /* Maximum cpy size for an add-copy double instruction, up through VCD_NEAR modes (default 6) */ uint8_t addcopy_same_cpy_max; /* Maximum cpy size for an add-copy double instruction, VCD_SAME modes (default 4) */ uint8_t copyadd_add_max; /* Maximum add size for a copy-add double instruction, all modes (default 1) */ uint8_t copyadd_near_cpy_max; /* Maximum cpy size for a copy-add double instruction, up through VCD_NEAR modes (default 4) */ uint8_t copyadd_same_cpy_max; /* Maximum cpy size for a copy-add double instruction, VCD_SAME modes (default 4) */ xd3_code_table_sizes addcopy_max_sizes[MAX_MODES]; xd3_code_table_sizes copyadd_max_sizes[MAX_MODES]; }; /* The rfc3284 code table is represented: */ static const xd3_code_table_desc __rfc3284_code_table_desc = { 17, /* add sizes */ 4, /* near modes */ 3, /* same modes */ 15, /* copy sizes */ 4, /* add-copy max add */ 6, /* add-copy max cpy, near */ 4, /* add-copy max cpy, same */ 1, /* copy-add max add */ 4, /* copy-add max cpy, near */ 4, /* copy-add max cpy, same */ /* addcopy */ { {6,163,3},{6,175,3},{6,187,3},{6,199,3},{6,211,3},{6,223,3},{4,235,1},{4,239,1},{4,243,1} }, /* copyadd */ { {4,247,1},{4,248,1},{4,249,1},{4,250,1},{4,251,1},{4,252,1},{4,253,1},{4,254,1},{4,255,1} }, }; #if GENERIC_ENCODE_TABLES /* An alternate code table for testing (5 near, 0 same): * * TYPE SIZE MODE TYPE SIZE MODE INDEX * --------------------------------------------------------------- * 1. Run 0 0 Noop 0 0 0 * 2. Add 0, [1,23] 0 Noop 0 0 [1,24] * 3. Copy 0, [4,20] 0 Noop 0 0 [25,42] * 4. Copy 0, [4,20] 1 Noop 0 0 [43,60] * 5. Copy 0, [4,20] 2 Noop 0 0 [61,78] * 6. Copy 0, [4,20] 3 Noop 0 0 [79,96] * 7. Copy 0, [4,20] 4 Noop 0 0 [97,114] * 8. Copy 0, [4,20] 5 Noop 0 0 [115,132] * 9. Copy 0, [4,20] 6 Noop 0 0 [133,150] * 10. Add [1,4] 0 Copy [4,6] 0 [151,162] * 11. Add [1,4] 0 Copy [4,6] 1 [163,174] * 12. Add [1,4] 0 Copy [4,6] 2 [175,186] * 13. Add [1,4] 0 Copy [4,6] 3 [187,198] * 14. Add [1,4] 0 Copy [4,6] 4 [199,210] * 15. Add [1,4] 0 Copy [4,6] 5 [211,222] * 16. Add [1,4] 0 Copy [4,6] 6 [223,234] * 17. Copy 4 [0,6] Add [1,3] 0 [235,255] * --------------------------------------------------------------- */ static const xd3_code_table_desc __alternate_code_table_desc = { 23, /* add sizes */ 5, /* near modes */ 0, /* same modes */ 17, /* copy sizes */ 4, /* add-copy max add */ 6, /* add-copy max cpy, near */ 0, /* add-copy max cpy, same */ 3, /* copy-add max add */ 4, /* copy-add max cpy, near */ 0, /* copy-add max cpy, same */ /* addcopy */ { {6,151,3},{6,163,3},{6,175,3},{6,187,3},{6,199,3},{6,211,3},{6,223,3},{0,0,0},{0,0,0} }, /* copyadd */ { {4,235,1},{4,238,1},{4,241,1},{4,244,1},{4,247,1},{4,250,1},{4,253,1},{0,0,0},{0,0,0} }, }; #endif /* Computes code table entries of TBL using the specified description. */ static void xd3_build_code_table (const xd3_code_table_desc *desc, xd3_dinst *tbl) { int size1, size2, mode; int cpy_modes = 2 + desc->near_modes + desc->same_modes; xd3_dinst *d = tbl; (d++)->type1 = XD3_RUN; (d++)->type1 = XD3_ADD; for (size1 = 1; size1 <= desc->add_sizes; size1 += 1, d += 1) { d->type1 = XD3_ADD; d->size1 = size1; } for (mode = 0; mode < cpy_modes; mode += 1) { (d++)->type1 = XD3_CPY + mode; for (size1 = MIN_MATCH; size1 < MIN_MATCH + desc->cpy_sizes; size1 += 1, d += 1) { d->type1 = XD3_CPY + mode; d->size1 = size1; } } for (mode = 0; mode < cpy_modes; mode += 1) { for (size1 = 1; size1 <= desc->addcopy_add_max; size1 += 1) { int max = (mode < 2 + desc->near_modes) ? desc->addcopy_near_cpy_max : desc->addcopy_same_cpy_max; for (size2 = MIN_MATCH; size2 <= max; size2 += 1, d += 1) { d->type1 = XD3_ADD; d->size1 = size1; d->type2 = XD3_CPY + mode; d->size2 = size2; } } } for (mode = 0; mode < cpy_modes; mode += 1) { int max = (mode < 2 + desc->near_modes) ? desc->copyadd_near_cpy_max : desc->copyadd_same_cpy_max; for (size1 = MIN_MATCH; size1 <= max; size1 += 1) { for (size2 = 1; size2 <= desc->copyadd_add_max; size2 += 1, d += 1) { d->type1 = XD3_CPY + mode; d->size1 = size1; d->type2 = XD3_ADD; d->size2 = size2; } } } XD3_ASSERT (d - tbl == 256); } /* This function generates the static default code table. */ static const xd3_dinst* xd3_rfc3284_code_table (void) { static xd3_dinst __rfc3284_code_table[256]; if (__rfc3284_code_table[0].type1 != XD3_RUN) { xd3_build_code_table (& __rfc3284_code_table_desc, __rfc3284_code_table); } return __rfc3284_code_table; } #if XD3_ENCODER #if GENERIC_ENCODE_TABLES /* This function generates the alternate code table. */ static const xd3_dinst* xd3_alternate_code_table (void) { static xd3_dinst __alternate_code_table[256]; if (__alternate_code_table[0].type1 != XD3_RUN) { xd3_build_code_table (& __alternate_code_table_desc, __alternate_code_table); } return __alternate_code_table; } /* This function computes the ideal second instruction INST based on preceding instruction * PREV. If it is possible to issue a double instruction based on this pair it sets * PREV->code2, otherwise it sets INST->code1. */ static void xd3_choose_instruction (const xd3_code_table_desc *desc, xd3_rinst *prev, xd3_rinst *inst) { switch (inst->type) { case XD3_RUN: /* The 0th instruction is RUN */ inst->code1 = 0; break; case XD3_ADD: if (inst->size > desc->add_sizes) { /* The first instruction is non-immediate ADD */ inst->code1 = 1; } else { /* The following ADD_SIZES instructions are immediate ADDs */ inst->code1 = 1 + inst->size; /* Now check for a possible COPY-ADD double instruction */ if (prev != NULL) { int prev_mode = prev->type - XD3_CPY; /* If previous is a copy. Note: as long as the previous is not a RUN * instruction, it should be a copy because it cannot be an add. This check * is more clear. */ if (prev_mode >= 0 && inst->size <= desc->copyadd_add_max) { const xd3_code_table_sizes *sizes = & desc->copyadd_max_sizes[prev_mode]; /* This check and the inst->size-<= above are == in the default table. */ if (prev->size <= sizes->cpy_max) { /* The second and third exprs are 0 in the default table. */ prev->code2 = sizes->offset + (sizes->mult * (prev->size - MIN_MATCH)) + (inst->size - MIN_ADD); } } } } break; default: { int mode = inst->type - XD3_CPY; /* The large copy instruction is offset by the run, large add, and immediate adds, * then multipled by the number of immediate copies plus one (the large copy) * (i.e., if there are 15 immediate copy instructions then there are 16 copy * instructions per mode). */ inst->code1 = 2 + desc->add_sizes + (1 + desc->cpy_sizes) * mode; /* Now if the copy is short enough for an immediate instruction. */ if (inst->size < MIN_MATCH + desc->cpy_sizes) { inst->code1 += inst->size + 1 - MIN_MATCH; /* Now check for a possible ADD-COPY double instruction. */ if ( (prev != NULL) && (prev->type == XD3_ADD) && (prev->size <= desc->addcopy_add_max) ) { const xd3_code_table_sizes *sizes = & desc->addcopy_max_sizes[mode]; if (inst->size <= sizes->cpy_max) { prev->code2 = sizes->offset + (sizes->mult * (prev->size - MIN_ADD)) + (inst->size - MIN_MATCH); } } } } } } #else /* GENERIC_ENCODE_TABLES */ /* This version of xd3_choose_instruction is hard-coded for the default table. */ static void xd3_choose_instruction (/* const xd3_code_table_desc *desc,*/ xd3_rinst *prev, xd3_rinst *inst) { switch (inst->type) { case XD3_RUN: inst->code1 = 0; break; case XD3_ADD: inst->code1 = 1; if (inst->size <= 17) { inst->code1 += inst->size; if ( (inst->size == 1) && (prev != NULL) && (prev->size == 4) && (prev->type >= XD3_CPY) ) { prev->code2 = 247 + (prev->type - XD3_CPY); } } break; default: { int mode = inst->type - XD3_CPY; XD3_ASSERT (inst->type >= XD3_CPY && inst->type < 12); inst->code1 = 19 + 16 * mode; if (inst->size <= 18) { inst->code1 += inst->size - 3; if ( (prev != NULL) && (prev->type == XD3_ADD) && (prev->size <= 4) ) { if ( (inst->size <= 6) && (mode <= 5) ) { prev->code2 = 163 + (mode * 12) + (3 * (prev->size - 1)) + (inst->size - 4); XD3_ASSERT (prev->code2 <= 234); } else if ( (inst->size == 4) && (mode >= 6) ) { prev->code2 = 235 + ((mode - 6) * 4) + (prev->size - 1); XD3_ASSERT (prev->code2 <= 246); } } } XD3_ASSERT (inst->code1 <= 162); } break; } } #endif /* GENERIC_ENCODE_TABLES */ /****************************************************************************************** Instruction table encoder/decoder ******************************************************************************************/ #if GENERIC_ENCODE_TABLES #if GENERIC_ENCODE_TABLES_COMPUTE == 0 /* In this case, we hard-code the result of compute_code_table_encoding for each alternate * code table, presuming that saves time/space. This has been 131 bytes, but secondary * compression was turned off. */ static const uint8_t __alternate_code_table_compressed[178] = {0xd6,0xc3,0xc4,0x00,0x00,0x01,0x8a,0x6f,0x40,0x81,0x27,0x8c,0x00,0x00,0x4a,0x4a,0x0d,0x02,0x01,0x03, 0x01,0x03,0x00,0x01,0x00,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e, 0x0f,0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,0x00,0x01,0x01,0x01,0x02,0x02,0x02,0x03,0x03,0x03,0x04, 0x04,0x04,0x04,0x00,0x04,0x05,0x06,0x01,0x02,0x03,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x05,0x05,0x05, 0x06,0x06,0x06,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x00,0x02,0x00,0x18,0x13,0x63,0x00,0x1b,0x00,0x54, 0x00,0x15,0x23,0x6f,0x00,0x28,0x13,0x54,0x00,0x15,0x01,0x1a,0x31,0x23,0x6c,0x0d,0x23,0x48,0x00,0x15, 0x93,0x6f,0x00,0x28,0x04,0x23,0x51,0x04,0x32,0x00,0x2b,0x00,0x12,0x00,0x12,0x00,0x12,0x00,0x12,0x00, 0x12,0x00,0x12,0x53,0x57,0x9c,0x07,0x43,0x6f,0x00,0x34,0x00,0x0c,0x00,0x0c,0x00,0x0c,0x00,0x0c,0x00, 0x0c,0x00,0x0c,0x00,0x15,0x00,0x82,0x6f,0x00,0x15,0x12,0x0c,0x00,0x03,0x03,0x00,0x06,0x00,}; static int xd3_compute_alternate_table_encoding (xd3_stream *stream, const uint8_t **data, usize_t *size) { (*data) = __alternate_code_table_compressed; (*size) = sizeof (__alternate_code_table_compressed); return 0; } #else /* The alternate code table will be computed and stored here. */ static uint8_t __alternate_code_table_compressed[CODE_TABLE_VCDIFF_SIZE]; static usize_t __alternate_code_table_compressed_size; /* This function generates a delta describing the code table for encoding within a VCDIFF * file. This function is NOT thread safe because it is only intended that this function * is used to generate statically-compiled strings. */ int xd3_compute_code_table_encoding (xd3_stream *in_stream, const xd3_dinst *code_table, uint8_t *comp_string, usize_t *comp_string_size) { /* TODO: use xd3_encode_memory() */ uint8_t dflt_string[CODE_TABLE_STRING_SIZE]; uint8_t code_string[CODE_TABLE_STRING_SIZE]; xd3_stream stream; xd3_source source; xd3_config config; int ret; memset (& source, 0, sizeof (source)); xd3_compute_code_table_string (xd3_rfc3284_code_table (), dflt_string); xd3_compute_code_table_string (code_table, code_string); /* Use DJW secondary compression if it is on by default. This saves about 20 bytes. */ xd3_init_config (& config, XD3_FLUSH | (SECONDARY_DJW ? XD3_SEC_DJW : 0)); /* Be exhaustive. */ config.sprevsz = 1<<11; config.srcwin_maxsz = CODE_TABLE_STRING_SIZE; config.smatch_cfg = XD3_SMATCH_SOFT; config.smatcher_soft.large_look = 4; config.smatcher_soft.large_step = 1; config.smatcher_soft.small_look = 4; config.smatcher_soft.small_chain = CODE_TABLE_STRING_SIZE; config.smatcher_soft.small_lchain = CODE_TABLE_STRING_SIZE; config.smatcher_soft.max_lazy = CODE_TABLE_STRING_SIZE; config.smatcher_soft.long_enough = CODE_TABLE_STRING_SIZE; if ((ret = xd3_config_stream (& stream, & config))) { goto fail; } source.size = CODE_TABLE_STRING_SIZE; source.blksize = CODE_TABLE_STRING_SIZE; source.onblk = CODE_TABLE_STRING_SIZE; source.name = ""; source.curblk = dflt_string; source.curblkno = 0; if ((ret = xd3_set_source (& stream, & source))) { goto fail; } if ((ret = xd3_encode_stream (& stream, code_string, CODE_TABLE_STRING_SIZE, comp_string, comp_string_size, CODE_TABLE_VCDIFF_SIZE))) { goto fail; } fail: in_stream->msg = stream.msg; xd3_free_stream (& stream); return ret; } /* Compute a delta between alternate and rfc3284 tables. As soon as another alternate * table is added, this code should become generic. For now there is only one alternate * table for testing. */ static int xd3_compute_alternate_table_encoding (xd3_stream *stream, const uint8_t **data, usize_t *size) { int ret; if (__alternate_code_table_compressed[0] == 0) { if ((ret = xd3_compute_code_table_encoding (stream, xd3_alternate_code_table (), __alternate_code_table_compressed, & __alternate_code_table_compressed_size))) { return ret; } /* During development of a new code table, enable this variable to print the new * static contents and determine its size. At run time the table will be filled in * appropriately, but at least it should have the proper size beforehand. */ #if GENERIC_ENCODE_TABLES_COMPUTE_PRINT { int i; DP(RINT, "\nstatic const usize_t __alternate_code_table_compressed_size = %u;\n", __alternate_code_table_compressed_size); DP(RINT, "static const uint8_t __alternate_code_table_compressed[%u] =\n{", __alternate_code_table_compressed_size); for (i = 0; i < __alternate_code_table_compressed_size; i += 1) { DP(RINT, "0x%02x,", __alternate_code_table_compressed[i]); if ((i % 20) == 19) { DP(RINT, "\n"); } } DP(RINT, "};\n"); } #endif } (*data) = __alternate_code_table_compressed; (*size) = __alternate_code_table_compressed_size; return 0; } #endif /* GENERIC_ENCODE_TABLES_COMPUTE != 0 */ #endif /* GENERIC_ENCODE_TABLES */ #endif /* XD3_ENCODER */ /* This function generates the 1536-byte string specified in sections 5.4 and 7 of * rfc3284, which is used to represent a code table within a VCDIFF file. */ void xd3_compute_code_table_string (const xd3_dinst *code_table, uint8_t *str) { int i, s; XD3_ASSERT (CODE_TABLE_STRING_SIZE == 6 * 256); for (s = 0; s < 6; s += 1) { for (i = 0; i < 256; i += 1) { switch (s) { case 0: *str++ = (code_table[i].type1 >= XD3_CPY ? XD3_CPY : code_table[i].type1); break; case 1: *str++ = (code_table[i].type2 >= XD3_CPY ? XD3_CPY : code_table[i].type2); break; case 2: *str++ = (code_table[i].size1); break; case 3: *str++ = (code_table[i].size2); break; case 4: *str++ = (code_table[i].type1 >= XD3_CPY ? code_table[i].type1 - XD3_CPY : 0); break; case 5: *str++ = (code_table[i].type2 >= XD3_CPY ? code_table[i].type2 - XD3_CPY : 0); break; } } } } /* This function translates the code table string into the internal representation. The * stream's near and same-modes should already be set. */ static int xd3_apply_table_string (xd3_stream *stream, const uint8_t *code_string) { int i, s; int modes = TOTAL_MODES (stream); xd3_dinst *code_table; if ((code_table = stream->code_table_alloc = xd3_alloc (stream, sizeof (xd3_dinst), 256)) == NULL) { return ENOMEM; } for (s = 0; s < 6; s += 1) { for (i = 0; i < 256; i += 1) { switch (s) { case 0: if (*code_string > XD3_CPY) { stream->msg = "invalid code-table opcode"; return XD3_INTERNAL; } code_table[i].type1 = *code_string++; break; case 1: if (*code_string > XD3_CPY) { stream->msg = "invalid code-table opcode"; return XD3_INTERNAL; } code_table[i].type2 = *code_string++; break; case 2: if (*code_string != 0 && code_table[i].type1 == XD3_NOOP) { stream->msg = "invalid code-table size"; return XD3_INTERNAL; } code_table[i].size1 = *code_string++; break; case 3: if (*code_string != 0 && code_table[i].type2 == XD3_NOOP) { stream->msg = "invalid code-table size"; return XD3_INTERNAL; } code_table[i].size2 = *code_string++; break; case 4: if (*code_string >= modes) { stream->msg = "invalid code-table mode"; return XD3_INTERNAL; } if (*code_string != 0 && code_table[i].type1 != XD3_CPY) { stream->msg = "invalid code-table mode"; return XD3_INTERNAL; } code_table[i].type1 += *code_string++; break; case 5: if (*code_string >= modes) { stream->msg = "invalid code-table mode"; return XD3_INTERNAL; } if (*code_string != 0 && code_table[i].type2 != XD3_CPY) { stream->msg = "invalid code-table mode"; return XD3_INTERNAL; } code_table[i].type2 += *code_string++; break; } } } stream->code_table = code_table; return 0; } /* This function applies a code table delta and returns an actual code table. */ static int xd3_apply_table_encoding (xd3_stream *in_stream, const uint8_t *data, usize_t size) { uint8_t dflt_string[CODE_TABLE_STRING_SIZE]; uint8_t code_string[CODE_TABLE_STRING_SIZE]; usize_t code_size; xd3_stream stream; xd3_source source; int ret; /* The default code table string can be cached if alternate code tables ever become * popular. */ xd3_compute_code_table_string (xd3_rfc3284_code_table (), dflt_string); source.size = CODE_TABLE_STRING_SIZE; source.blksize = CODE_TABLE_STRING_SIZE; source.onblk = CODE_TABLE_STRING_SIZE; source.name = "rfc3284 code table"; source.curblk = dflt_string; source.curblkno = 0; if ((ret = xd3_config_stream (& stream, NULL)) || (ret = xd3_set_source (& stream, & source)) || (ret = xd3_decode_stream (& stream, data, size, code_string, & code_size, sizeof (code_string)))) { in_stream->msg = stream.msg; goto fail; } if (code_size != sizeof (code_string)) { stream.msg = "corrupt code-table encoding"; ret = XD3_INTERNAL; goto fail; } if ((ret = xd3_apply_table_string (in_stream, code_string))) { goto fail; } fail: xd3_free_stream (& stream); return ret; } /****************************************************************************************** Permute stuff ******************************************************************************************/ #if HASH_PERMUTE == 0 #define PERMUTE(x) (x) #else #define PERMUTE(x) (__single_hash[(uint)x]) static const uint16_t __single_hash[256] = { /* Random numbers generated using SLIB's pseudo-random number generator. This hashes * the input alphabet. */ 0xbcd1, 0xbb65, 0x42c2, 0xdffe, 0x9666, 0x431b, 0x8504, 0xeb46, 0x6379, 0xd460, 0xcf14, 0x53cf, 0xdb51, 0xdb08, 0x12c8, 0xf602, 0xe766, 0x2394, 0x250d, 0xdcbb, 0xa678, 0x02af, 0xa5c6, 0x7ea6, 0xb645, 0xcb4d, 0xc44b, 0xe5dc, 0x9fe6, 0x5b5c, 0x35f5, 0x701a, 0x220f, 0x6c38, 0x1a56, 0x4ca3, 0xffc6, 0xb152, 0x8d61, 0x7a58, 0x9025, 0x8b3d, 0xbf0f, 0x95a3, 0xe5f4, 0xc127, 0x3bed, 0x320b, 0xb7f3, 0x6054, 0x333c, 0xd383, 0x8154, 0x5242, 0x4e0d, 0x0a94, 0x7028, 0x8689, 0x3a22, 0x0980, 0x1847, 0xb0f1, 0x9b5c, 0x4176, 0xb858, 0xd542, 0x1f6c, 0x2497, 0x6a5a, 0x9fa9, 0x8c5a, 0x7743, 0xa8a9, 0x9a02, 0x4918, 0x438c, 0xc388, 0x9e2b, 0x4cad, 0x01b6, 0xab19, 0xf777, 0x365f, 0x1eb2, 0x091e, 0x7bf8, 0x7a8e, 0x5227, 0xeab1, 0x2074, 0x4523, 0xe781, 0x01a3, 0x163d, 0x3b2e, 0x287d, 0x5e7f, 0xa063, 0xb134, 0x8fae, 0x5e8e, 0xb7b7, 0x4548, 0x1f5a, 0xfa56, 0x7a24, 0x900f, 0x42dc, 0xcc69, 0x02a0, 0x0b22, 0xdb31, 0x71fe, 0x0c7d, 0x1732, 0x1159, 0xcb09, 0xe1d2, 0x1351, 0x52e9, 0xf536, 0x5a4f, 0xc316, 0x6bf9, 0x8994, 0xb774, 0x5f3e, 0xf6d6, 0x3a61, 0xf82c, 0xcc22, 0x9d06, 0x299c, 0x09e5, 0x1eec, 0x514f, 0x8d53, 0xa650, 0x5c6e, 0xc577, 0x7958, 0x71ac, 0x8916, 0x9b4f, 0x2c09, 0x5211, 0xf6d8, 0xcaaa, 0xf7ef, 0x287f, 0x7a94, 0xab49, 0xfa2c, 0x7222, 0xe457, 0xd71a, 0x00c3, 0x1a76, 0xe98c, 0xc037, 0x8208, 0x5c2d, 0xdfda, 0xe5f5, 0x0b45, 0x15ce, 0x8a7e, 0xfcad, 0xaa2d, 0x4b5c, 0xd42e, 0xb251, 0x907e, 0x9a47, 0xc9a6, 0xd93f, 0x085e, 0x35ce, 0xa153, 0x7e7b, 0x9f0b, 0x25aa, 0x5d9f, 0xc04d, 0x8a0e, 0x2875, 0x4a1c, 0x295f, 0x1393, 0xf760, 0x9178, 0x0f5b, 0xfa7d, 0x83b4, 0x2082, 0x721d, 0x6462, 0x0368, 0x67e2, 0x8624, 0x194d, 0x22f6, 0x78fb, 0x6791, 0xb238, 0xb332, 0x7276, 0xf272, 0x47ec, 0x4504, 0xa961, 0x9fc8, 0x3fdc, 0xb413, 0x007a, 0x0806, 0x7458, 0x95c6, 0xccaa, 0x18d6, 0xe2ae, 0x1b06, 0xf3f6, 0x5050, 0xc8e8, 0xf4ac, 0xc04c, 0xf41c, 0x992f, 0xae44, 0x5f1b, 0x1113, 0x1738, 0xd9a8, 0x19ea, 0x2d33, 0x9698, 0x2fe9, 0x323f, 0xcde2, 0x6d71, 0xe37d, 0xb697, 0x2c4f, 0x4373, 0x9102, 0x075d, 0x8e25, 0x1672, 0xec28, 0x6acb, 0x86cc, 0x186e, 0x9414, 0xd674, 0xd1a5 }; #endif /****************************************************************************************** Ctable stuff ******************************************************************************************/ #if HASH_PRIME static const usize_t __primes[] = { 11, 19, 37, 73, 109, 163, 251, 367, 557, 823, 1237, 1861, 2777, 4177, 6247, 9371, 14057, 21089, 31627, 47431, 71143, 106721, 160073, 240101, 360163, 540217, 810343, 1215497, 1823231, 2734867, 4102283, 6153409, 9230113, 13845163, 20767711, 31151543, 46727321, 70090921, 105136301, 157704401, 236556601, 354834919, 532252367, 798378509, 1197567719, 1796351503 }; static const usize_t __nprimes = SIZEOF_ARRAY (__primes); #endif static INLINE uint32_t xd3_checksum_hash (const xd3_hash_cfg *cfg, const uint32_t cksum) { #if HASH_PRIME /* If the table is prime compute the modulus. */ return (cksum % cfg->size); #else /* If the table is power-of-two compute the mask.*/ return (cksum ^ (cksum >> cfg->shift)) & cfg->mask; #endif } /****************************************************************************************** Create the hash table. ******************************************************************************************/ static INLINE void xd3_swap_uint8p (uint8_t** p1, uint8_t** p2) { uint8_t *t = (*p1); (*p1) = (*p2); (*p2) = t; } static INLINE void xd3_swap_usize_t (usize_t* p1, usize_t* p2) { usize_t t = (*p1); (*p1) = (*p2); (*p2) = t; } /* It's not constant time, but it computes the log. */ static int xd3_check_pow2 (usize_t value, usize_t *logof) { usize_t x = 1; usize_t nolog; if (logof == NULL) { logof = &nolog; } *logof = 0; for (; x != 0; x <<= 1, *logof += 1) { if (x == value) { return 0; } } return XD3_INTERNAL; } static usize_t xd3_round_blksize (usize_t sz, usize_t blksz) { usize_t mod = sz & (blksz-1); XD3_ASSERT (xd3_check_pow2 (blksz, NULL) == 0); return mod ? (sz + (blksz - mod)) : sz; } #if XD3_ENCODER #if !HASH_PRIME static usize_t xd3_size_log2 (usize_t slots) { int bits = 28; /* This should not be an unreasonable limit. */ int i; for (i = 3; i <= bits; i += 1) { if (slots < (1 << i)) { bits = i-1; break; } } return bits; } #endif static void xd3_size_hashtable (xd3_stream *stream, usize_t slots, xd3_hash_cfg *cfg) { /* initialize ctable: the number of hash buckets is computed from the table of primes or * the nearest power-of-two, in both cases rounding down in favor of using less * memory. */ #if HASH_PRIME usize_t i; cfg->size = __primes[__nprimes-1]; for (i = 1; i < __nprimes; i += 1) { if (slots < __primes[i]) { cfg->size = __primes[i-1]; break; } } #else int bits = xd3_size_log2 (slots); cfg->size = (1 << bits); cfg->mask = (cfg->size - 1); cfg->shift = min (32 - bits, 16); #endif } #endif /****************************************************************************************** Cksum function ******************************************************************************************/ /* OPT: It turns out that the compiler can't unroll the loop as well as you can by hand. */ static INLINE uint32_t xd3_lcksum (const uint8_t *seg, const int ln) { int i = 0; uint32_t low = 0; uint32_t high = 0; for (; i < ln; i += 1) { low += PERMUTE(*seg++); high += low; } return ((high & 0xffff) << 16) | (low & 0xffff); } #if ARITH_SMALL_CKSUM static INLINE usize_t xd3_scksum (const uint8_t *seg, const int ln) { usize_t c; /* The -1 is because UPDATE operates on seg[1..ln] */ SMALL_CKSUM_UPDATE (c,(seg-1),ln); return c; } #else #define xd3_scksum(seg,ln) xd3_lcksum(seg,ln) #endif /****************************************************************************************** Adler32 stream function: code copied from Zlib, defined in RFC1950 ******************************************************************************************/ #define A32_BASE 65521L /* Largest prime smaller than 2^16 */ #define A32_NMAX 5552 /* NMAX is the largest n such that 255n(n+1)/2 + (n+1)(BASE-1) <= 2^32-1 */ #define A32_DO1(buf,i) {s1 += buf[i]; s2 += s1;} #define A32_DO2(buf,i) A32_DO1(buf,i); A32_DO1(buf,i+1); #define A32_DO4(buf,i) A32_DO2(buf,i); A32_DO2(buf,i+2); #define A32_DO8(buf,i) A32_DO4(buf,i); A32_DO4(buf,i+4); #define A32_DO16(buf) A32_DO8(buf,0); A32_DO8(buf,8); static unsigned long adler32 (unsigned long adler, const uint8_t *buf, usize_t len) { unsigned long s1 = adler & 0xffff; unsigned long s2 = (adler >> 16) & 0xffff; int k; while (len > 0) { k = (len < A32_NMAX) ? len : A32_NMAX; len -= k; while (k >= 16) { A32_DO16(buf); buf += 16; k -= 16; } if (k != 0) { do { s1 += *buf++; s2 += s1; } while (--k); } s1 %= A32_BASE; s2 %= A32_BASE; } return (s2 << 16) | s1; } /****************************************************************************************** Run-length function ******************************************************************************************/ static INLINE int xd3_comprun (const uint8_t *seg, int slook, uint8_t *run_cp) { int i; int run_l = 0; uint8_t run_c = 0; for (i = 0; i < slook; i += 1) { NEXTRUN(seg[i]); } (*run_cp) = run_c; return run_l; } /****************************************************************************************** Basic encoder/decoder functions ******************************************************************************************/ static int xd3_decode_byte (xd3_stream *stream, uint *val) { if (stream->avail_in == 0) { stream->msg = "further input required"; return XD3_INPUT; } (*val) = stream->next_in[0]; DECODE_INPUT (1); return 0; } static int xd3_decode_bytes (xd3_stream *stream, uint8_t *buf, usize_t *pos, usize_t size) { usize_t want; usize_t take; /* Note: The case where (*pos == size) happens when a zero-length appheader or code * table is transmitted, but there is nothing in the standard against that. */ while (*pos < size) { if (stream->avail_in == 0) { stream->msg = "further input required"; return XD3_INPUT; } want = size - *pos; take = min (want, stream->avail_in); memcpy (buf + *pos, stream->next_in, take); DECODE_INPUT (take); (*pos) += take; } return 0; } #if XD3_ENCODER static int xd3_emit_byte (xd3_stream *stream, xd3_output **outputp, uint8_t code) { xd3_output *output = (*outputp); if (output->next == output->avail) { xd3_output *aoutput; if ((aoutput = xd3_alloc_output (stream, output)) == NULL) { return ENOMEM; } output = (*outputp) = aoutput; } output->base[output->next++] = code; return 0; } static int xd3_emit_bytes (xd3_stream *stream, xd3_output **outputp, const uint8_t *base, usize_t size) { xd3_output *output = (*outputp); do { usize_t take; if (output->next == output->avail) { xd3_output *aoutput; if ((aoutput = xd3_alloc_output (stream, output)) == NULL) { return ENOMEM; } output = (*outputp) = aoutput; } take = min (output->avail - output->next, size); memcpy (output->base + output->next, base, take); output->next += take; size -= take; base += take; } while (size > 0); return 0; } #endif /* XD3_ENCODER */ /****************************************************************************************** Integer encoder/decoder functions ******************************************************************************************/ #define DECODE_INTEGER_TYPE(PART,OFLOW) \ while (stream->avail_in != 0) \ { \ uint next = stream->next_in[0]; \ \ DECODE_INPUT(1); \ \ if (PART & OFLOW) \ { \ stream->msg = "overflow in decode_integer"; \ return XD3_INVALID_INPUT; \ } \ \ PART = (PART << 7) | (next & 127); \ \ if ((next & 128) == 0) \ { \ (*val) = PART; \ PART = 0; \ return 0; \ } \ } \ \ stream->msg = "further input required"; \ return XD3_INPUT #define READ_INTEGER_TYPE(TYPE, OFLOW) \ TYPE val = 0; \ const uint8_t *inp = (*inpp); \ uint next; \ \ do \ { \ if (inp == max) \ { \ stream->msg = "end-of-input in read_integer"; \ return XD3_INVALID_INPUT; \ } \ \ if (val & OFLOW) \ { \ stream->msg = "overflow in read_intger"; \ return XD3_INVALID_INPUT; \ } \ \ next = (*inp++); \ val = (val << 7) | (next & 127); \ } \ while (next & 128); \ \ (*valp) = val; \ (*inpp) = inp; \ \ return 0 #define EMIT_INTEGER_TYPE() \ /* max 64-bit value in base-7 encoding is 9.1 bytes */ \ uint8_t buf[10]; \ usize_t bufi = 10; \ \ XD3_ASSERT (num >= 0); \ \ /* This loop performs division and turns on all MSBs. */ \ do \ { \ buf[--bufi] = (num & 127) | 128; \ num >>= 7; \ } \ while (num != 0); \ \ /* Turn off MSB of the last byte. */ \ buf[9] &= 127; \ \ XD3_ASSERT (bufi >= 0); \ \ return xd3_emit_bytes (stream, output, buf + bufi, 10 - bufi) #define IF_SIZEOF32(x) if (num < (1U << (7 * (x)))) return (x); #define IF_SIZEOF64(x) if (num < (1ULL << (7 * (x)))) return (x); #if USE_UINT32 static uint xd3_sizeof_uint32_t (uint32_t num) { IF_SIZEOF32(1); IF_SIZEOF32(2); IF_SIZEOF32(3); IF_SIZEOF32(4); return 5; } static int xd3_decode_uint32_t (xd3_stream *stream, uint32_t *val) { DECODE_INTEGER_TYPE (stream->dec_32part, UINT32_OFLOW_MASK); } static int xd3_read_uint32_t (xd3_stream *stream, const uint8_t **inpp, const uint8_t *max, uint32_t *valp) { READ_INTEGER_TYPE (uint32_t, UINT32_OFLOW_MASK); } #if XD3_ENCODER static int xd3_emit_uint32_t (xd3_stream *stream, xd3_output **output, uint32_t num) { EMIT_INTEGER_TYPE (); } #endif #endif #if USE_UINT64 static int xd3_decode_uint64_t (xd3_stream *stream, uint64_t *val) { DECODE_INTEGER_TYPE (stream->dec_64part, UINT64_OFLOW_MASK); } #if XD3_ENCODER static int xd3_emit_uint64_t (xd3_stream *stream, xd3_output **output, uint64_t num) { EMIT_INTEGER_TYPE (); } #endif /* These are tested but not used */ #if REGRESSION_TEST static int xd3_read_uint64_t (xd3_stream *stream, const uint8_t **inpp, const uint8_t *max, uint64_t *valp) { READ_INTEGER_TYPE (uint64_t, UINT64_OFLOW_MASK); } static uint xd3_sizeof_uint64_t (uint64_t num) { IF_SIZEOF64(1); IF_SIZEOF64(2); IF_SIZEOF64(3); IF_SIZEOF64(4); IF_SIZEOF64(5); IF_SIZEOF64(6); IF_SIZEOF64(7); IF_SIZEOF64(8); IF_SIZEOF64(9); return 10; } #endif #endif /****************************************************************************************** Address cache stuff ******************************************************************************************/ static int xd3_alloc_cache (xd3_stream *stream) { if (((stream->acache.s_near > 0) && (stream->acache.near_array = xd3_alloc (stream, stream->acache.s_near, sizeof (usize_t))) == NULL) || ((stream->acache.s_same > 0) && (stream->acache.same_array = xd3_alloc (stream, stream->acache.s_same * 256, sizeof (usize_t))) == NULL)) { return ENOMEM; } return 0; } static void xd3_init_cache (xd3_addr_cache* acache) { if (acache->s_near > 0) { memset (acache->near_array, 0, acache->s_near * sizeof (usize_t)); acache->next_slot = 0; } if (acache->s_same > 0) { memset (acache->same_array, 0, acache->s_same * 256 * sizeof (usize_t)); } } static void xd3_update_cache (xd3_addr_cache* acache, usize_t addr) { if (acache->s_near > 0) { acache->near_array[acache->next_slot] = addr; acache->next_slot = (acache->next_slot + 1) % acache->s_near; } if (acache->s_same > 0) { acache->same_array[addr % (acache->s_same*256)] = addr; } } #if XD3_ENCODER /* OPT: this gets called a lot, can it be optimized? */ static int xd3_encode_address (xd3_stream *stream, usize_t addr, usize_t here, uint8_t* mode) { usize_t d, bestd; int i, bestm, ret; xd3_addr_cache* acache = & stream->acache; #define SMALLEST_INT(x) do { if (((x) & ~127) == 0) { goto good; } } while (0) /* Attempt to find the address mode that yields the smallest integer value for "d", the * encoded address value, thereby minimizing the encoded size of the address. */ bestd = addr; bestm = VCD_SELF; XD3_ASSERT (addr < here); SMALLEST_INT (bestd); if ((d = here-addr) < bestd) { bestd = d; bestm = VCD_HERE; SMALLEST_INT (bestd); } for (i = 0; i < acache->s_near; i += 1) { d = addr - acache->near_array[i]; if (d >= 0 && d < bestd) { bestd = d; bestm = i+2; /* 2 counts the VCD_SELF, VCD_HERE modes */ SMALLEST_INT (bestd); } } if (acache->s_same > 0 && acache->same_array[d = addr%(acache->s_same*256)] == addr) { bestd = d%256; bestm = acache->s_near + 2 + d/256; /* 2 + s_near offsets past the VCD_NEAR modes */ if ((ret = xd3_emit_byte (stream, & ADDR_TAIL (stream), bestd))) { return ret; } } else { good: if ((ret = xd3_emit_size (stream, & ADDR_TAIL (stream), bestd))) { return ret; } } xd3_update_cache (acache, addr); (*mode) += bestm; return 0; } #endif static int xd3_decode_address (xd3_stream *stream, usize_t here, uint mode, const uint8_t **inpp, const uint8_t *max, uint32_t *valp) { int ret; uint same_start = 2 + stream->acache.s_near; if (mode < same_start) { if ((ret = xd3_read_size (stream, inpp, max, valp))) { return ret; } switch (mode) { case VCD_SELF: break; case VCD_HERE: (*valp) = here - (*valp); break; default: (*valp) += stream->acache.near_array[mode - 2]; break; } } else { if (*inpp == max) { stream->msg = "address underflow"; return XD3_INVALID_INPUT; } mode -= same_start; (*valp) = stream->acache.same_array[mode*256 + (**inpp)]; (*inpp) += 1; } xd3_update_cache (& stream->acache, *valp); return 0; } /****************************************************************************************** Alloc/free ******************************************************************************************/ static void* __xd3_alloc_func (void* opaque, usize_t items, usize_t size) { return malloc (items * size); } static void __xd3_free_func (void* opaque, void* address) { free (address); } static void* xd3_alloc (xd3_stream *stream, usize_t elts, usize_t size) { void *a = stream->alloc (stream->opaque, elts, size); if (a != NULL) { IF_DEBUG (stream->alloc_cnt += 1); } else { stream->msg = "out of memory"; } return a; } static void xd3_free (xd3_stream *stream, void *ptr) { if (ptr != NULL) { IF_DEBUG (stream->free_cnt += 1); XD3_ASSERT (stream->free_cnt <= stream->alloc_cnt); stream->free (stream->opaque, ptr); } } #if XD3_ENCODER static void* xd3_alloc0 (xd3_stream *stream, usize_t elts, usize_t size) { void *a = xd3_alloc (stream, elts, size); if (a != NULL) { memset (a, 0, elts * size); } return a; } static xd3_output* xd3_alloc_output (xd3_stream *stream, xd3_output *old_output) { xd3_output *output; uint8_t *base; if (stream->enc_free != NULL) { output = stream->enc_free; stream->enc_free = output->next_page; } else { if ((output = xd3_alloc (stream, 1, sizeof (xd3_output))) == NULL) { return NULL; } if ((base = xd3_alloc (stream, XD3_ALLOCSIZE, sizeof (uint8_t))) == NULL) { xd3_free (stream, output); return NULL; } output->base = base; output->avail = XD3_ALLOCSIZE; } output->next = 0; if (old_output) { old_output->next_page = output; } output->next_page = NULL; return output; } static usize_t xd3_sizeof_output (xd3_output *output) { usize_t s = 0; for (; output; output = output->next_page) { s += output->next; } return s; } static void xd3_freelist_output (xd3_stream *stream, xd3_output *output) { xd3_output *tmp; while (output) { tmp = output; output = output->next_page; tmp->next = 0; tmp->next_page = stream->enc_free; stream->enc_free = tmp; } } static void xd3_free_output (xd3_stream *stream, xd3_output *output) { xd3_output *next; again: if (output == NULL) { return; } next = output->next_page; xd3_free (stream, output->base); xd3_free (stream, output); output = next; goto again; } #endif /* XD3_ENCODER */ void xd3_free_stream (xd3_stream *stream) { xd3_iopt_buflist *blist = stream->iopt_alloc; while (blist != NULL) { xd3_iopt_buflist *tmp = blist; blist = blist->next; xd3_free (stream, tmp->buffer); xd3_free (stream, tmp); } xd3_free (stream, stream->large_table); xd3_free (stream, stream->small_table); xd3_free (stream, stream->small_prev); #if XD3_ENCODER { int i; for (i = 0; i < ENC_SECTS; i += 1) { xd3_free_output (stream, stream->enc_heads[i]); } xd3_free_output (stream, stream->enc_free); } #endif xd3_free (stream, stream->acache.near_array); xd3_free (stream, stream->acache.same_array); xd3_free (stream, stream->inst_sect.copied1); xd3_free (stream, stream->addr_sect.copied1); xd3_free (stream, stream->data_sect.copied1); xd3_free (stream, stream->dec_buffer); xd3_free (stream, (uint8_t*) stream->dec_lastwin); xd3_free (stream, stream->buf_in); xd3_free (stream, stream->dec_appheader); xd3_free (stream, stream->dec_codetbl); xd3_free (stream, stream->code_table_alloc); #if SECONDARY_ANY xd3_free (stream, stream->inst_sect.copied2); xd3_free (stream, stream->addr_sect.copied2); xd3_free (stream, stream->data_sect.copied2); if (stream->sec_type != NULL) { stream->sec_type->destroy (stream, stream->sec_stream_d); stream->sec_type->destroy (stream, stream->sec_stream_i); stream->sec_type->destroy (stream, stream->sec_stream_a); } #endif XD3_ASSERT (stream->alloc_cnt == stream->free_cnt); memset (stream, 0, sizeof (xd3_stream)); } #if (XD3_DEBUG > 1 || VCDIFF_TOOLS) static const char* xd3_rtype_to_string (xd3_rtype type, int print_mode) { switch (type) { case XD3_NOOP: return "NOOP "; case XD3_RUN: return "RUN "; case XD3_ADD: return "ADD "; default: break; } if (! print_mode) { return "CPY "; } switch (type) { case XD3_CPY + 0: return "CPY_0"; case XD3_CPY + 1: return "CPY_1"; case XD3_CPY + 2: return "CPY_2"; case XD3_CPY + 3: return "CPY_3"; case XD3_CPY + 4: return "CPY_4"; case XD3_CPY + 5: return "CPY_5"; case XD3_CPY + 6: return "CPY_6"; case XD3_CPY + 7: return "CPY_7"; case XD3_CPY + 8: return "CPY_8"; case XD3_CPY + 9: return "CPY_9"; default: return "CPY>9"; } } #endif /****************************************************************************************** Stream configuration ******************************************************************************************/ int xd3_config_stream(xd3_stream *stream, xd3_config *config) { int ret; xd3_config defcfg; xd3_smatcher *smatcher = &stream->smatcher; if (config == NULL) { config = & defcfg; memset (config, 0, sizeof (*config)); } /* Initial setup: no error checks yet */ memset (stream, 0, sizeof (*stream)); stream->winsize = config->winsize ? config->winsize : XD3_DEFAULT_WINSIZE; stream->sprevsz = config->sprevsz ? config->sprevsz : XD3_DEFAULT_SPREVSZ; stream->srcwin_maxsz = config->srcwin_maxsz ? config->srcwin_maxsz : XD3_DEFAULT_SRCWINSZ; if (config->iopt_size == 0) { stream->iopt_size = XD3_ALLOCSIZE / sizeof(xd3_rinst); stream->iopt_unlimited = 1; } else { stream->iopt_size = config->iopt_size; } stream->getblk = config->getblk; stream->alloc = config->alloc ? config->alloc : __xd3_alloc_func; stream->free = config->freef ? config->freef : __xd3_free_func; stream->opaque = config->opaque; stream->flags = config->flags; /* Secondary setup. */ stream->sec_data = config->sec_data; stream->sec_inst = config->sec_inst; stream->sec_addr = config->sec_addr; stream->sec_data.data_type = DATA_SECTION; stream->sec_inst.data_type = INST_SECTION; stream->sec_addr.data_type = ADDR_SECTION; /* Check static sizes. */ if (sizeof (usize_t) != SIZEOF_USIZE_T || sizeof (xoff_t) != SIZEOF_XOFF_T || (ret = xd3_check_pow2(XD3_ALLOCSIZE, NULL))) { stream->msg = "incorrect compilation: wrong integer sizes"; return XD3_INTERNAL; } /* Check/set secondary compressor. */ switch (stream->flags & XD3_SEC_TYPE) { case 0: if (stream->flags & XD3_SEC_OTHER) { stream->msg = "XD3_SEC flags require a secondary compressor type"; return XD3_INTERNAL; } break; case XD3_SEC_FGK: FGK_CASE (stream); case XD3_SEC_DJW: DJW_CASE (stream); default: stream->msg = "too many secondary compressor types set"; return XD3_INTERNAL; } /* Check/set encoder code table. */ switch (stream->flags & XD3_ALT_CODE_TABLE) { case 0: stream->code_table_desc = & __rfc3284_code_table_desc; stream->code_table_func = xd3_rfc3284_code_table; break; #if GENERIC_ENCODE_TABLES case XD3_ALT_CODE_TABLE: stream->code_table_desc = & __alternate_code_table_desc; stream->code_table_func = xd3_alternate_code_table; stream->comp_table_func = xd3_compute_alternate_table_encoding; break; #endif default: stream->msg = "alternate code table support was not compiled"; return XD3_INTERNAL; } /* Check sprevsz */ if (smatcher->small_chain == 1) { stream->sprevsz = 0; } else { if ((ret = xd3_check_pow2 (stream->sprevsz, NULL))) { stream->msg = "sprevsz is required to be a power of two"; return XD3_INTERNAL; } stream->sprevmask = stream->sprevsz - 1; } /* Default scanner settings. */ switch (config->smatch_cfg) { IF_BUILD_SOFT(case XD3_SMATCH_SOFT: { *smatcher = config->smatcher_soft; smatcher->string_match = __smatcher_soft.string_match; smatcher->name = __smatcher_soft.name; if (smatcher->large_look < MIN_MATCH || smatcher->large_step < 1 || smatcher->small_look < MIN_MATCH) { stream->msg = "invalid soft string-match config"; return XD3_INVALID; } break; }) IF_BUILD_DEFAULT(case XD3_SMATCH_DEFAULT: *smatcher = __smatcher_default; break;) IF_BUILD_SLOW(case XD3_SMATCH_SLOW: *smatcher = __smatcher_slow; break;) IF_BUILD_FASTEST(case XD3_SMATCH_FASTEST: *smatcher = __smatcher_fastest; break;) IF_BUILD_FAST(case XD3_SMATCH_FAST: *smatcher = __smatcher_fast; break;) default: stream->msg = "invalid string match config type"; return XD3_INTERNAL; } if (config->smatch_cfg == XD3_SMATCH_DEFAULT && (stream->flags & XD3_COMPLEVEL_MASK) != 0) { int level = (stream->flags & XD3_COMPLEVEL_MASK) >> XD3_COMPLEVEL_SHIFT; switch (level) { case 1: case 2: IF_BUILD_FASTEST(*smatcher = __smatcher_fastest; break;) case 3: case 4: case 5: IF_BUILD_FAST(*smatcher = __smatcher_fast; break;) case 6: IF_BUILD_DEFAULT(*smatcher = __smatcher_default; break;) default: IF_BUILD_SLOW(*smatcher = __smatcher_slow; break;) } } return 0; } /****************************************************************************************** Getblk interface ******************************************************************************************/ /* This function interfaces with the client getblk function, checks its results, etc. */ static int xd3_getblk (xd3_stream *stream/*, xd3_source *source*/, xoff_t blkno) { int ret; xd3_source *source = stream->src; if (blkno >= source->blocks) { IF_DEBUG1 (DP(RINT "[getblk] block %"Q"u\n", blkno)); stream->msg = "source file too short"; return XD3_INTERNAL; } if (blkno != source->curblkno || source->curblk == NULL) { XD3_ASSERT (source->curblk != NULL || blkno != source->curblkno); source->getblkno = blkno; if (stream->getblk == NULL) { stream->msg = "getblk source input"; return XD3_GETSRCBLK; } else if ((ret = stream->getblk (stream, source, blkno)) != 0) { stream->msg = "getblk failed"; return ret; } XD3_ASSERT (source->curblk != NULL); } if (source->onblk != xd3_bytes_on_srcblk (source, blkno)) { stream->msg = "getblk returned short block"; return XD3_INTERNAL; } return 0; } /****************************************************************************************** Stream open/close ******************************************************************************************/ int xd3_set_source (xd3_stream *stream, xd3_source *src) { xoff_t blk_num; xoff_t tail_size; IF_DEBUG1 (DP(RINT "[set source] size %"Q"u\n", src->size)); if (src == NULL || src->size < stream->smatcher.large_look) { return 0; } stream->src = src; blk_num = src->size / src->blksize; tail_size = src->size % src->blksize; src->blocks = blk_num + (tail_size > 0); src->srclen = 0; src->srcbase = 0; return 0; } void xd3_abort_stream (xd3_stream *stream) { stream->dec_state = DEC_ABORTED; stream->enc_state = ENC_ABORTED; } int xd3_close_stream (xd3_stream *stream) { if (stream->enc_state != 0 && stream->enc_state != ENC_ABORTED) { /* If encoding, should be ready for more input but not actually have any. */ if (stream->enc_state != ENC_INPUT || stream->avail_in != 0) { stream->msg = "encoding is incomplete"; return XD3_INTERNAL; } } else { switch (stream->dec_state) { case DEC_VCHEAD: case DEC_WININD: /* TODO: Address the zero-byte ambiguity. Does the encoder emit a window or * not? If so, then catch an error here. If not, need another routine to say * decode_at_least_one_if_empty. */ case DEC_ABORTED: break; default: /* If decoding, should be ready for the next window. */ stream->msg = "EOF in decode"; return XD3_INTERNAL; } } return 0; } /****************************************************************************************** Application header ******************************************************************************************/ int xd3_get_appheader (xd3_stream *stream, uint8_t **data, usize_t *size) { if (stream->dec_state < DEC_WININD) { stream->msg = "application header not available"; return XD3_INTERNAL; } (*data) = stream->dec_appheader; (*size) = stream->dec_appheadsz; return 0; } /****************************************************************************************** Decoder stuff ******************************************************************************************/ #include "xdelta3-decode.h" /****************************************************************************************** Encoder stuff ******************************************************************************************/ #if XD3_ENCODER void xd3_set_appheader (xd3_stream *stream, const uint8_t *data, usize_t size) { stream->enc_appheader = data; stream->enc_appheadsz = size; } #if XD3_DEBUG static int xd3_iopt_check (xd3_stream *stream) { int ul = xd3_rlist_length (& stream->iopt_used); int fl = xd3_rlist_length (& stream->iopt_free); return (ul + fl + (stream->iout ? 1 : 0)) == stream->iopt_size; } #endif static xd3_rinst* xd3_iopt_free (xd3_stream *stream, xd3_rinst *i) { xd3_rinst *n = xd3_rlist_remove (i); xd3_rlist_push_back (& stream->iopt_free, i); return n; } static void xd3_iopt_free_nonadd (xd3_stream *stream, xd3_rinst *i) { if (i->type != XD3_ADD) { xd3_rlist_push_back (& stream->iopt_free, i); } } /* When an instruction is ready to flush from the iopt buffer, this function is called to * produce an encoding. It writes the instruction plus size, address, and data to the * various encoding sections. */ static int xd3_iopt_finish_encoding (xd3_stream *stream, xd3_rinst *inst) { int ret; /* Check for input overflow. */ XD3_ASSERT (inst->pos + inst->size <= stream->avail_in); switch (inst->type) { case XD3_CPY: { /* the address may have an offset if there is a source window. */ usize_t addr; xd3_source *src = stream->src; if (src != NULL) { /* If there is a source copy, the source must have its source window decided * before we can encode. This can be bad -- we have to make this decision * even if no source matches have been found. */ if (stream->srcwin_decided == 0) { if ((ret = xd3_srcwin_setup (stream))) { return ret; } } /* xtra field indicates the copy is from the source */ if (inst->xtra) { XD3_ASSERT (inst->addr >= src->srcbase); XD3_ASSERT (inst->addr + inst->size <= src->srcbase + src->srclen); addr = (inst->addr - src->srcbase); stream->n_scpy += 1; stream->l_scpy += inst->size; } else { /* with source window: target copy address is offset by taroff. */ addr = stream->taroff + (usize_t) inst->addr; stream->n_tcpy += 1; stream->l_tcpy += inst->size; } } else { addr = (usize_t) inst->addr; stream->n_tcpy += 1; stream->l_tcpy += inst->size; } XD3_ASSERT (inst->size >= MIN_MATCH); /* the "here" position is always offset by taroff */ if ((ret = xd3_encode_address (stream, addr, inst->pos + stream->taroff, & inst->type))) { return ret; } IF_DEBUG1 ({ static int cnt; DP(RINT "[iopt copy:%d] pos %"Q"u-%"Q"u addr %"Q"u-%"Q"u size %u\n", cnt++, stream->total_in + inst->pos, stream->total_in + inst->pos + inst->size, inst->addr, inst->addr + inst->size, inst->size); }); break; } case XD3_RUN: { XD3_ASSERT (inst->size >= MIN_MATCH); if ((ret = xd3_emit_byte (stream, & DATA_TAIL (stream), inst->xtra))) { return ret; } stream->n_run += 1; stream->l_run += inst->size; IF_DEBUG1 ({ static int cnt; DP(RINT "[iopt run:%d] pos %"Q"u size %u\n", cnt++, stream->total_in + inst->pos, inst->size); }); break; } case XD3_ADD: { if ((ret = xd3_emit_bytes (stream, & DATA_TAIL (stream), stream->next_in + inst->pos, inst->size))) { return ret; } stream->n_add += 1; stream->l_add += inst->size; IF_DEBUG1 ({ static int cnt; DP(RINT "[iopt add:%d] pos %"Q"u size %u\n", cnt++, stream->total_in + inst->pos, inst->size); }); break; } } /* This is the only place stream->unencoded_offset is incremented. */ XD3_ASSERT (stream->unencoded_offset == inst->pos); stream->unencoded_offset += inst->size; IF_DEBUG (stream->n_emit += inst->size); inst->code2 = 0; XD3_CHOOSE_INSTRUCTION (stream, stream->iout, inst); if (stream->iout != NULL) { if (stream->iout->code2 != 0) { if ((ret = xd3_emit_double (stream, stream->iout, inst, stream->iout->code2))) { return ret; } xd3_iopt_free_nonadd (stream, stream->iout); xd3_iopt_free_nonadd (stream, inst); stream->iout = NULL; return 0; } else { if ((ret = xd3_emit_single (stream, stream->iout, stream->iout->code1))) { return ret; } xd3_iopt_free_nonadd (stream, stream->iout); } } stream->iout = inst; return 0; } /* This possibly encodes an add instruction, iadd, which must remain on the stack until * the following call to xd3_iopt_finish_encoding. */ static int xd3_iopt_add (xd3_stream *stream, usize_t pos, xd3_rinst *iadd) { int ret; usize_t off = stream->unencoded_offset; if (pos > off) { iadd->type = XD3_ADD; iadd->pos = off; iadd->size = pos - off; if ((ret = xd3_iopt_finish_encoding (stream, iadd))) { return ret; } } return 0; } /* This function calls xd3_iopt_finish_encoding to finish encoding an instruction, and it * may also produce an add instruction for an unmatched region. */ static int xd3_iopt_add_encoding (xd3_stream *stream, xd3_rinst *inst) { int ret; xd3_rinst iadd; if ((ret = xd3_iopt_add (stream, inst->pos, & iadd))) { return ret; } if ((ret = xd3_iopt_finish_encoding (stream, inst))) { return ret; } return 0; } /* Generates a final add instruction to encode the remaining input. */ static int xd3_iopt_add_finalize (xd3_stream *stream) { int ret; xd3_rinst iadd; if ((ret = xd3_iopt_add (stream, stream->avail_in, & iadd))) { return ret; } if (stream->iout) { if ((ret = xd3_emit_single (stream, stream->iout, stream->iout->code1))) { return ret; } xd3_iopt_free_nonadd (stream, stream->iout); stream->iout = NULL; } return 0; } /* Compact the instruction buffer by choosing the best non-overlapping instructions when * lazy string-matching. There are no ADDs in the iopt buffer because those are * synthesized in xd3_iopt_add_encoding and during xd3_iopt_add_finalize. */ static int xd3_iopt_flush_instructions (xd3_stream *stream, int force) { xd3_rinst *r1 = xd3_rlist_front (& stream->iopt_used); xd3_rinst *r2; xd3_rinst *r3; usize_t r1end; usize_t r2end; usize_t r2off; usize_t r2moff; usize_t gap; usize_t flushed; int ret; XD3_ASSERT (xd3_iopt_check (stream)); /* Note: once tried to skip this step if it's possible to assert there are no * overlapping instructions. Doesn't work because xd3_opt_erase leaves overlapping * instructions. */ while (! xd3_rlist_end (& stream->iopt_used, r1) && ! xd3_rlist_end (& stream->iopt_used, r2 = xd3_rlist_next (r1))) { r1end = r1->pos + r1->size; /* If the instructions do not overlap, continue. */ if (r1end <= r2->pos) { r1 = r2; continue; } r2end = r2->pos + r2->size; /* The min_match adjustments prevent this. */ XD3_ASSERT (r2end > (r1end + LEAST_MATCH_INCR)); /* If r3 is available... */ if (! xd3_rlist_end (& stream->iopt_used, r3 = xd3_rlist_next (r2))) { /* If r3 starts before r1 finishes or just about, r2 is irrelevant */ if (r3->pos <= r1end + 1) { xd3_iopt_free (stream, r2); continue; } } else if (! force) { /* Unless force, end the loop when r3 is not available. */ break; } r2off = r2->pos - r1->pos; r2moff = r2end - r1end; gap = r2end - r1->pos; /* If the two matches overlap almost entirely, choose the better match and discard * the other. This heuristic is BLACK MAGIC. Havesomething better? */ if (gap < 2*MIN_MATCH || r2moff <= 2 || r2off <= 2) { /* Only one match should be used, choose the longer one. */ if (r1->size < r2->size) { xd3_iopt_free (stream, r1); r1 = r2; } else { /* We are guaranteed that r1 does not overlap now, so advance past r2 */ r1 = xd3_iopt_free (stream, r2); } continue; } else { /* Shorten one of the instructions -- could be optimized based on the address * cache. */ usize_t average; usize_t newsize; usize_t adjust1; XD3_ASSERT (r1end > r2->pos && r2end > r1->pos); /* Try to balance the length of both instructions, but avoid making both longer * than MAX_MATCH_SPLIT . */ average = (gap) / 2; newsize = min (MAX_MATCH_SPLIT, gap - average); /* Should be possible to simplify this code. */ if (newsize > r1->size) { /* shorten r2 */ adjust1 = r1end - r2->pos; } else if (newsize > r2->size) { /* shorten r1 */ adjust1 = r1end - r2->pos; XD3_ASSERT (r1->size > adjust1); r1->size -= adjust1; /* don't shorten r2 */ adjust1 = 0; } else { /* shorten r1 */ adjust1 = r1->size - newsize; if (r2->pos > r1end - adjust1) { adjust1 -= r2->pos - (r1end - adjust1); } XD3_ASSERT (r1->size > adjust1); r1->size -= adjust1; /* shorten r2 */ XD3_ASSERT (r1->pos + r1->size >= r2->pos); adjust1 = r1->pos + r1->size - r2->pos; } /* Fallthrough above if-else, shorten r2 */ XD3_ASSERT (r2->size > adjust1); r2->size -= adjust1; r2->pos += adjust1; r2->addr += adjust1; XD3_ASSERT (r1->size >= MIN_MATCH); XD3_ASSERT (r2->size >= MIN_MATCH); r1 = r2; } } XD3_ASSERT (xd3_iopt_check (stream)); /* If forcing, pick instructions until the list is empty, otherwise this empties 50% of * the queue. */ for (flushed = 0; ! xd3_rlist_empty (& stream->iopt_used); ) { xd3_rinst *renc = xd3_rlist_pop_front (& stream->iopt_used); if ((ret = xd3_iopt_add_encoding (stream, renc))) { return ret; } if (! force) { if (++flushed > stream->iopt_size / 2) { break; } /* If there are only two instructions remaining, break, because they were * not optimized. This means there were more than 50% eliminated by the * loop above. */ r1 = xd3_rlist_front (& stream->iopt_used); if (xd3_rlist_end(& stream->iopt_used, r1) || xd3_rlist_end(& stream->iopt_used, r2 = xd3_rlist_next (r1)) || xd3_rlist_end(& stream->iopt_used, r3 = xd3_rlist_next (r2))) { break; } } } XD3_ASSERT (xd3_iopt_check (stream)); XD3_ASSERT (!force || xd3_rlist_length (& stream->iopt_used) == 0); return 0; } static int xd3_iopt_get_slot (xd3_stream *stream, xd3_rinst** iptr) { xd3_rinst *i; int ret; if (xd3_rlist_empty (& stream->iopt_free)) { if (stream->iopt_unlimited) { int elts = XD3_ALLOCSIZE / sizeof(xd3_rinst); if ((ret = xd3_alloc_iopt (stream, elts))) { return ret; } stream->iopt_size += elts; } else { if ((ret = xd3_iopt_flush_instructions (stream, 0))) { return ret; } XD3_ASSERT (! xd3_rlist_empty (& stream->iopt_free)); } } i = xd3_rlist_pop_back (& stream->iopt_free); xd3_rlist_push_back (& stream->iopt_used, i); (*iptr) = i; ++stream->i_slots_used; return 0; } /* A copy is about to be emitted that extends backwards to POS, therefore it may * completely cover some existing instructions in the buffer. If an instruction is * completely covered by this new match, erase it. If the new instruction is covered by * the previous one, return 1 to skip it. */ static void xd3_iopt_erase (xd3_stream *stream, usize_t pos, usize_t size) { while (! xd3_rlist_empty (& stream->iopt_used)) { xd3_rinst *r = xd3_rlist_back (& stream->iopt_used); /* Verify that greedy is working. The previous instruction should end before the * new one begins. */ XD3_ASSERT ((stream->flags & XD3_BEGREEDY) == 0 || (r->pos + r->size <= pos)); /* Verify that min_match is working. The previous instruction should end before the * new one ends. */ XD3_ASSERT ((stream->flags & XD3_BEGREEDY) != 0 || (r->pos + r->size < pos + size)); /* See if the last instruction starts before the new instruction. If so, there is * nothing to erase. */ if (r->pos < pos) { return; } /* Otherwise, the new instruction covers the old one, delete it and repeat. */ xd3_rlist_remove (r); xd3_rlist_push_back (& stream->iopt_free, r); --stream->i_slots_used; } } /* This function tells the last matched input position. */ static usize_t xd3_iopt_last_matched (xd3_stream *stream) { xd3_rinst *r; if (xd3_rlist_empty (& stream->iopt_used)) { return 0; } r = xd3_rlist_back (& stream->iopt_used); return r->pos + r->size; } /****************************************************************************************** Emit routines ******************************************************************************************/ static int xd3_emit_single (xd3_stream *stream, xd3_rinst *single, uint code) { int has_size = stream->code_table[code].size1 == 0; int ret; IF_DEBUG1 (DP(RINT "[emit1] %u %s (%u) code %u\n", single->pos, xd3_rtype_to_string (single->type, 0), single->size, code)); if ((ret = xd3_emit_byte (stream, & INST_TAIL (stream), code))) { return ret; } if (has_size) { if ((ret = xd3_emit_size (stream, & INST_TAIL (stream), single->size))) { return ret; } } return 0; } static int xd3_emit_double (xd3_stream *stream, xd3_rinst *first, xd3_rinst *second, uint code) { int ret; /* All double instructions use fixed sizes, so all we need to do is output the * instruction code, no sizes. */ XD3_ASSERT (stream->code_table[code].size1 != 0 && stream->code_table[code].size2 != 0); if ((ret = xd3_emit_byte (stream, & INST_TAIL (stream), code))) { return ret; } IF_DEBUG1 (DP(RINT "[emit2]: %u %s (%u) %s (%u) code %u\n", first->pos, xd3_rtype_to_string (first->type, 0), first->size, xd3_rtype_to_string (second->type, 0), second->size, code)); return 0; } /* This enters a potential run instruction into the iopt buffer. The position argument is * relative to the target window. */ static INLINE int xd3_emit_run (xd3_stream *stream, usize_t pos, usize_t size, uint8_t run_c) { xd3_rinst* ri; int ret; XD3_ASSERT (pos + size <= stream->avail_in); if ((ret = xd3_iopt_get_slot (stream, & ri))) { return ret; } ri->type = XD3_RUN; ri->xtra = run_c; ri->pos = pos; ri->size = size; return 0; } /* This enters a potential copy instruction into the iopt buffer. The position argument * is relative to the target window.. */ static INLINE int xd3_found_match (xd3_stream *stream, usize_t pos, usize_t size, xoff_t addr, int is_source) { xd3_rinst* ri; int ret; XD3_ASSERT (pos + size <= stream->avail_in); if ((ret = xd3_iopt_get_slot (stream, & ri))) { return ret; } ri->type = XD3_CPY; ri->xtra = is_source; ri->pos = pos; ri->size = size; ri->addr = addr; return 0; } static int xd3_emit_hdr (xd3_stream *stream) { int ret; int use_secondary = stream->sec_type != NULL; int use_adler32 = stream->flags & XD3_ADLER32; int vcd_source = xd3_encoder_used_source (stream); uint win_ind = 0; uint del_ind = 0; usize_t enc_len; usize_t tgt_len; usize_t data_len; usize_t inst_len; usize_t addr_len; XD3_ASSERT (stream->n_emit == stream->avail_in); if (stream->current_window == 0) { uint hdr_ind = 0; int use_appheader = stream->enc_appheader != NULL; int use_gencodetbl = GENERIC_ENCODE_TABLES && (stream->code_table_desc != & __rfc3284_code_table_desc); if (use_secondary) { hdr_ind |= VCD_SECONDARY; } if (use_gencodetbl) { hdr_ind |= VCD_CODETABLE; } if (use_appheader) { hdr_ind |= VCD_APPHEADER; } if ((ret = xd3_emit_byte (stream, & HDR_TAIL (stream), VCDIFF_MAGIC1)) != 0 || (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), VCDIFF_MAGIC2)) != 0 || (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), VCDIFF_MAGIC3)) != 0 || (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), VCDIFF_VERSION)) != 0 || (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), hdr_ind)) != 0) { return ret; } /* Secondary compressor ID */ #if SECONDARY_ANY if (use_secondary && (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), stream->sec_type->id))) { return ret; } #endif /* Compressed code table */ if (use_gencodetbl) { usize_t code_table_size; const uint8_t *code_table_data; if ((ret = stream->comp_table_func (stream, & code_table_data, & code_table_size))) { return ret; } if ((ret = xd3_emit_size (stream, & HDR_TAIL (stream), code_table_size + 2)) || (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), stream->code_table_desc->near_modes)) || (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), stream->code_table_desc->same_modes)) || (ret = xd3_emit_bytes (stream, & HDR_TAIL (stream), code_table_data, code_table_size))) { return ret; } } /* Application header */ if (use_appheader) { if ((ret = xd3_emit_size (stream, & HDR_TAIL (stream), stream->enc_appheadsz)) || (ret = xd3_emit_bytes (stream, & HDR_TAIL (stream), stream->enc_appheader, stream->enc_appheadsz))) { return ret; } } } /* try to compress this window */ #if SECONDARY_ANY if (use_secondary) { int data_sec = 0; int inst_sec = 0; int addr_sec = 0; # define ENCODE_SECONDARY_SECTION(UPPER,LOWER) \ ((stream->flags & XD3_SEC_NO ## UPPER) == 0 && \ (ret = xd3_encode_secondary (stream, & UPPER ## _HEAD (stream), & UPPER ## _TAIL (stream), \ & xd3_sec_ ## LOWER (stream), \ & stream->sec_ ## LOWER, & LOWER ## _sec))) if (ENCODE_SECONDARY_SECTION (DATA, data) || ENCODE_SECONDARY_SECTION (INST, inst) || ENCODE_SECONDARY_SECTION (ADDR, addr)) { return ret; } del_ind |= (data_sec ? VCD_DATACOMP : 0); del_ind |= (inst_sec ? VCD_INSTCOMP : 0); del_ind |= (addr_sec ? VCD_ADDRCOMP : 0); } #endif /* if (vcd_target) { win_ind |= VCD_TARGET; } */ if (vcd_source) { win_ind |= VCD_SOURCE; } if (use_adler32) { win_ind |= VCD_ADLER32; } /* window indicator */ if ((ret = xd3_emit_byte (stream, & HDR_TAIL (stream), win_ind))) { return ret; } /* source window */ if (vcd_source) { /* or (vcd_target) { ... } */ if ((ret = xd3_emit_size (stream, & HDR_TAIL (stream), stream->src->srclen)) || (ret = xd3_emit_offset (stream, & HDR_TAIL (stream), stream->src->srcbase))) { return ret; } } tgt_len = stream->avail_in; data_len = xd3_sizeof_output (DATA_HEAD (stream)); inst_len = xd3_sizeof_output (INST_HEAD (stream)); addr_len = xd3_sizeof_output (ADDR_HEAD (stream)); /* The enc_len field is redundent... doh! */ enc_len = (1 + (xd3_sizeof_size (tgt_len) + xd3_sizeof_size (data_len) + xd3_sizeof_size (inst_len) + xd3_sizeof_size (addr_len)) + data_len + inst_len + addr_len + (use_adler32 ? 4 : 0)); if ((ret = xd3_emit_size (stream, & HDR_TAIL (stream), enc_len)) || (ret = xd3_emit_size (stream, & HDR_TAIL (stream), tgt_len)) || (ret = xd3_emit_byte (stream, & HDR_TAIL (stream), del_ind)) || (ret = xd3_emit_size (stream, & HDR_TAIL (stream), data_len)) || (ret = xd3_emit_size (stream, & HDR_TAIL (stream), inst_len)) || (ret = xd3_emit_size (stream, & HDR_TAIL (stream), addr_len))) { return ret; } if (use_adler32) { uint8_t send[4]; uint32_t a32 = adler32 (1L, stream->next_in, stream->avail_in); send[0] = (a32 >> 24); send[1] = (a32 >> 16); send[2] = (a32 >> 8); send[3] = (a32 & 0xff); if ((ret = xd3_emit_bytes (stream, & HDR_TAIL (stream), send, 4))) { return ret; } } return 0; } /****************************************************************************************** Encode routines ******************************************************************************************/ static int xd3_encode_buffer_leftover (xd3_stream *stream) { usize_t take; usize_t room; /* Allocate the buffer. */ if (stream->buf_in == NULL && (stream->buf_in = xd3_alloc (stream, stream->winsize, 1)) == NULL) { return ENOMEM; } /* Take leftover input first. */ if (stream->buf_leftover != NULL) { XD3_ASSERT (stream->buf_avail == 0); XD3_ASSERT (stream->buf_leftavail < stream->winsize); IF_DEBUG1 (DP(RINT "[leftover] previous %u avail %u\n", stream->buf_leftavail, stream->avail_in)); memcpy (stream->buf_in, stream->buf_leftover, stream->buf_leftavail); stream->buf_leftover = NULL; stream->buf_avail = stream->buf_leftavail; } /* Copy into the buffer. */ room = stream->winsize - stream->buf_avail; take = min (room, stream->avail_in); memcpy (stream->buf_in + stream->buf_avail, stream->next_in, take); stream->buf_avail += take; if (take < stream->avail_in) { /* Buffer is full */ stream->buf_leftover = stream->next_in + take; stream->buf_leftavail = stream->avail_in - take; IF_DEBUG1 (DP(RINT "[leftover] take %u remaining %u\n", take, stream->buf_leftavail)); } else if ((stream->buf_avail < stream->winsize) && !(stream->flags & XD3_FLUSH)) { /* Buffer has space */ IF_DEBUG1 (DP(RINT "[leftover] %u emptied\n", take)); return XD3_INPUT; } /* Use the buffer: */ stream->next_in = stream->buf_in; stream->avail_in = stream->buf_avail; stream->buf_avail = 0; return 0; } /* Allocates one block of xd3_rlist elements */ static int xd3_alloc_iopt (xd3_stream *stream, int elts) { int i; xd3_iopt_buflist* last = xd3_alloc (stream, sizeof (xd3_iopt_buflist), 1); if (last == NULL || (last->buffer = xd3_alloc (stream, sizeof (xd3_rinst), elts)) == NULL) { return ENOMEM; } last->next = stream->iopt_alloc; stream->iopt_alloc = last; for (i = 0; i < elts; i += 1) { xd3_rlist_push_back (& stream->iopt_free, & last->buffer[i]); } return 0; } /* This function allocates all memory initially used by the encoder. */ static int xd3_encode_init (xd3_stream *stream) { int i; int large_comp = (stream->src != NULL); int small_comp = ! (stream->flags & XD3_NOCOMPRESS); /* Memory allocations for checksum tables are delayed until xd3_string_match_init in the * first call to string_match--that way identical or short inputs require no table * allocation. */ if (large_comp) { usize_t hash_values = (stream->srcwin_maxsz / stream->smatcher.large_step); xd3_size_hashtable (stream, hash_values, & stream->large_hash); } if (small_comp) { usize_t hash_values = min(stream->winsize, stream->sprevsz); xd3_size_hashtable (stream, hash_values, & stream->small_hash); } for (i = 0; i < ENC_SECTS; i += 1) { if ((stream->enc_heads[i] = stream->enc_tails[i] = xd3_alloc_output (stream, NULL)) == NULL) { goto fail; } } /* iopt buffer */ xd3_rlist_init (& stream->iopt_used); xd3_rlist_init (& stream->iopt_free); if (xd3_alloc_iopt (stream, stream->iopt_size) != 0) { goto fail; } XD3_ASSERT (xd3_rlist_length (& stream->iopt_free) == stream->iopt_size); XD3_ASSERT (xd3_rlist_length (& stream->iopt_used) == 0); /* address cache, code table */ stream->acache.s_near = stream->code_table_desc->near_modes; stream->acache.s_same = stream->code_table_desc->same_modes; stream->code_table = stream->code_table_func (); return xd3_alloc_cache (stream); fail: return ENOMEM; } /* Called after the ENC_POSTOUT state, this puts the output buffers back into separate * lists and re-initializes some variables. (The output lists were spliced together * during the ENC_FLUSH state.) */ static void xd3_encode_reset (xd3_stream *stream) { int i; xd3_output *olist; IF_DEBUG (stream->n_emit = 0); stream->avail_in = 0; stream->small_reset = 1; stream->i_slots_used = 0; if (stream->src != NULL) { stream->src->srcbase = 0; stream->src->srclen = 0; stream->srcwin_decided = 0; stream->match_minaddr = 0; stream->match_maxaddr = 0; stream->taroff = 0; } /* Reset output chains. */ olist = stream->enc_heads[0]; for (i = 0; i < ENC_SECTS; i += 1) { XD3_ASSERT (olist != NULL); stream->enc_heads[i] = olist; stream->enc_tails[i] = olist; olist = olist->next_page; stream->enc_heads[i]->next = 0; stream->enc_heads[i]->next_page = NULL; stream->enc_tails[i]->next_page = NULL; stream->enc_tails[i] = stream->enc_heads[i]; } xd3_freelist_output (stream, olist); } /* The main encoding routine. */ int xd3_encode_input (xd3_stream *stream) { int ret, i; if (stream->dec_state != 0) { stream->msg = "encoder/decoder transition"; return XD3_INTERNAL; } switch (stream->enc_state) { case ENC_INIT: /* Only reached on first time through: memory setup. */ if ((ret = xd3_encode_init (stream))) { return ret; } stream->enc_state = ENC_INPUT; case ENC_INPUT: /* If there is no input yet, just return. This checks for next_in == NULL, not * avail_in == 0 since zero bytes is a valid input. There is an assertion in * xd3_avail_input() that next_in != NULL for this reason. By returning right away * we avoid creating an input buffer before the caller has supplied its first data. * It is possible for xd3_avail_input to be called both before and after the first * call to xd3_encode_input(). */ if (stream->next_in == NULL) { return XD3_INPUT; } enc_flush: /* See if we should buffer the input: either if there is already a leftover buffer, * or if the input is short of winsize without flush. The label at this point is * reached by a goto below, when there is leftover input after postout. */ if ((stream->buf_leftover != NULL) || (stream->avail_in < stream->winsize && ! (stream->flags & XD3_FLUSH))) { if ((ret = xd3_encode_buffer_leftover (stream))) { return ret; } } /* Initalize the address cache before each window. */ xd3_init_cache (& stream->acache); stream->input_position = 0; stream->min_match = MIN_MATCH; stream->unencoded_offset = 0; stream->enc_state = ENC_SEARCH; IF_DEBUG1 (DP(RINT "[input window:%"Q"u] input bytes %u offset %"Q"u\n", stream->current_window, stream->avail_in, stream->total_in)); return XD3_WINSTART; case ENC_SEARCH: /* Reentrant matching. */ if (stream->src != NULL) { switch (stream->match_state) { case MATCH_TARGET: /* Try matching forward at the start of the target. This is entered the * first time through, to check for a perfect match, and whenever there is a * source match that extends to the end of the previous window. The * match_srcpos field is initially zero and later set during * xd3_source_extend_match. */ if (stream->avail_in > 0) { /* This call can't fail because the source window is unrestricted. */ ret = xd3_source_match_setup (stream, stream->match_srcpos); XD3_ASSERT (ret == 0); stream->match_state = MATCH_FORWARD; } else { stream->match_state = MATCH_SEARCHING; } XD3_ASSERT (stream->match_fwd == 0); case MATCH_FORWARD: case MATCH_BACKWARD: if (stream->avail_in != 0) { if ((ret = xd3_source_extend_match (stream)) != 0) { return ret; } stream->input_position += stream->match_fwd; } case MATCH_SEARCHING: /* Continue string matching. (It's possible that the initial match * continued through the entire input, in which case we're still in * MATCH_FORWARD and should remain so for the next input window.) */ break; } } /* String matching... */ if (stream->avail_in != 0 && (ret = stream->smatcher.string_match (stream))) { return ret; } /* Flush the instrution buffer, then possibly add one more instruction, then emit * the header. */ stream->enc_state = ENC_FLUSH; if ((ret = xd3_iopt_flush_instructions (stream, 1)) || (ret = xd3_iopt_add_finalize (stream)) || (ret = xd3_emit_hdr (stream))) { return ret; } /* Begin output. */ stream->enc_current = HDR_HEAD (stream); /* Chain all the outputs together. After doing this, it looks as if there is only * one section. The other enc_heads are set to NULL to avoid freeing them more than * once. */ for (i = 1; i < ENC_SECTS; i += 1) { stream->enc_tails[i-1]->next_page = stream->enc_heads[i]; stream->enc_heads[i] = NULL; } enc_output: stream->enc_state = ENC_POSTOUT; stream->next_out = stream->enc_current->base; stream->avail_out = stream->enc_current->next; stream->total_out += (xoff_t) stream->avail_out; /* If there is any output in this buffer, return it, otherwise fall through to * handle the next buffer or finish the window after all buffers have been * output. */ if (stream->avail_out > 0) { /* This is the only place xd3_encode returns XD3_OUTPUT */ return XD3_OUTPUT; } case ENC_POSTOUT: if (stream->avail_out != 0) { stream->msg = "missed call to consume output"; return XD3_INTERNAL; } /* Continue outputting one buffer at a time, until the next is NULL. */ if ((stream->enc_current = stream->enc_current->next_page) != NULL) { goto enc_output; } stream->total_in += (xoff_t) stream->avail_in; stream->enc_state = ENC_POSTWIN; return XD3_WINFINISH; case ENC_POSTWIN: xd3_encode_reset (stream); stream->current_window += 1; stream->enc_state = ENC_INPUT; /* If there is leftover input to flush, repeat. */ if ((stream->buf_leftover != NULL) && (stream->flags & XD3_FLUSH)) { goto enc_flush; } /* Ready for more input. */ return XD3_INPUT; default: stream->msg = "invalid state"; return XD3_INTERNAL; } } #endif /* XD3_ENCODER */ /****************************************************************************************** Client convenience functions ******************************************************************************************/ static int xd3_process_stream (int is_encode, xd3_stream *stream, int (*func) (xd3_stream *), int close_stream, const uint8_t *input, usize_t input_size, uint8_t *output, usize_t *output_size, usize_t output_size_max) { usize_t ipos = 0; usize_t n = min(stream->winsize, input_size); (*output_size) = 0; stream->flags |= XD3_FLUSH; xd3_avail_input (stream, input + ipos, n); ipos += n; for (;;) { int ret; switch((ret = func (stream))) { case XD3_OUTPUT: { /* memcpy below */ break; } case XD3_INPUT: { n = min(stream->winsize, input_size - ipos); if (n == 0) { goto done; } xd3_avail_input (stream, input + ipos, n); ipos += n; continue; } case XD3_GOTHEADER: { /* ignore */ continue; } case XD3_WINSTART: { /* ignore */ continue; } case XD3_WINFINISH: { /* ignore */ continue; } case XD3_GETSRCBLK: { stream->msg = "stream requires source input"; return XD3_INTERNAL; } case 0: { /* xd3_encode_input/xd3_decode_input never return 0 */ stream->msg = "invalid return: 0"; return XD3_INTERNAL; } default: return ret; } if (*output_size + stream->avail_out > output_size_max) { stream->msg = "insufficient output space"; return ENOSPC; } memcpy (output + *output_size, stream->next_out, stream->avail_out); *output_size += stream->avail_out; xd3_consume_output (stream); } done: return (close_stream == 0) ? 0 : xd3_close_stream (stream); } static int xd3_process_memory (int is_encode, int (*func) (xd3_stream *), int close_stream, const uint8_t *input, usize_t input_size, const uint8_t *source, usize_t source_size, uint8_t *output, usize_t *output_size, usize_t output_size_max, int flags) { xd3_stream stream; xd3_config config; xd3_source src; int ret; if (input == NULL || output == NULL) { stream.msg = "invalid input/output buffer"; return XD3_INTERNAL; } memset (& stream, 0, sizeof (stream)); memset (& config, 0, sizeof (config)); config.flags = flags; if (is_encode) { config.srcwin_maxsz = source_size; config.winsize = min(input_size, (usize_t) XD3_DEFAULT_WINSIZE); config.iopt_size = min(input_size / 32, XD3_DEFAULT_IOPT_SIZE); config.iopt_size = max(config.iopt_size, 128U); config.sprevsz = XD3_DEFAULT_SPREVSZ; while (config.sprevsz / 2 > input_size) { config.sprevsz /= 2; } } if ((ret = xd3_config_stream (&stream, &config)) != 0) { goto exit; } if (source != NULL) { memset (& src, 0, sizeof (src)); src.size = source_size; src.blksize = source_size; src.onblk = source_size; src.curblk = source; src.curblkno = 0; if ((ret = xd3_set_source (&stream, &src)) != 0) { goto exit; } } if ((ret = xd3_process_stream (is_encode, & stream, func, 1, input, input_size, output, output_size, output_size_max)) != 0) { goto exit; } exit: xd3_free_stream(&stream); return ret; } int xd3_decode_stream (xd3_stream *stream, const uint8_t *input, usize_t input_size, uint8_t *output, usize_t *output_size, usize_t output_size_max) { return xd3_process_stream (0, stream, & xd3_decode_input, 1, input, input_size, output, output_size, output_size_max); } int xd3_decode_memory (const uint8_t *input, usize_t input_size, const uint8_t *source, usize_t source_size, uint8_t *output, usize_t *output_size, usize_t output_size_max, int flags) { return xd3_process_memory (0, & xd3_decode_input, 1, input, input_size, source, source_size, output, output_size, output_size_max, flags); } #if XD3_ENCODER int xd3_encode_stream (xd3_stream *stream, const uint8_t *input, usize_t input_size, uint8_t *output, usize_t *output_size, usize_t output_size_max) { return xd3_process_stream (1, stream, & xd3_encode_input, 1, input, input_size, output, output_size, output_size_max); } int xd3_encode_memory (const uint8_t *input, usize_t input_size, const uint8_t *source, usize_t source_size, uint8_t *output, usize_t *output_size, usize_t output_size_max, int flags) { return xd3_process_memory (1, & xd3_encode_input, 1, input, input_size, source, source_size, output, output_size, output_size_max, flags); } #endif /****************************************************************************************** String matching helpers ******************************************************************************************/ #if XD3_ENCODER /* Do the initial xd3_string_match() checksum table setup. Allocations are delayed until * first use to avoid allocation sometimes (e.g., perfect matches, zero-length inputs). */ static int xd3_string_match_init (xd3_stream *stream) { const int DO_SMALL = ! (stream->flags & XD3_NOCOMPRESS); const int DO_LARGE = (stream->src != NULL); if (DO_LARGE && stream->large_table == NULL) { if ((stream->large_table = xd3_alloc0 (stream, stream->large_hash.size, sizeof (usize_t))) == NULL) { return ENOMEM; } } if (DO_SMALL) { /* Subsequent calls can return immediately after checking reset. */ if (stream->small_table != NULL) { /* The target hash table is reinitialized once per window. */ /* TODO: This would not have to be reinitialized if absolute offsets * were being stored, as we would do for VCD_TARGET encoding. */ if (stream->small_reset) { stream->small_reset = 0; memset (stream->small_table, 0, sizeof (usize_t) * stream->small_hash.size); } return 0; } if ((stream->small_table = xd3_alloc0 (stream, stream->small_hash.size, sizeof (usize_t))) == NULL) { return ENOMEM; } /* If there is a previous table needed. */ if (stream->smatcher.small_lchain > 1 || stream->smatcher.small_chain > 1) { if ((stream->small_prev = xd3_alloc (stream, stream->sprevsz, sizeof (xd3_slist))) == NULL) { return ENOMEM; } } } return 0; } #if XD3_USE_LARGEFILE64 /* This function handles the 32/64bit ambiguity -- file positions are 64bit but the hash * table for source-offsets is 32bit. */ static xoff_t xd3_source_cksum_offset(xd3_stream *stream, usize_t low) { xoff_t scp = stream->srcwin_cksum_pos; xoff_t s0 = scp >> 32; usize_t sr = (usize_t) scp; if (s0 == 0) { return low; } /* This should not be >= because srcwin_cksum_pos is the next * position to index. */ if (low > sr) { return (--s0 << 32) | low; } return (s0 << 32) | low; } #else static xoff_t xd3_source_cksum_offset(xd3_stream *stream, usize_t low) { return (xoff_t) low; } #endif /* This function sets up the stream->src fields srcbase, srclen. The call is delayed * until these values are needed to encode a copy address. At this point the decision has * to be made. */ static int xd3_srcwin_setup (xd3_stream *stream) { xd3_source *src = stream->src; xoff_t length; /* Check the undecided state. */ XD3_ASSERT (src->srclen == 0 && src->srcbase == 0); /* Avoid repeating this call. */ stream->srcwin_decided = 1; /* If the stream is flushing, then the iopt buffer was able to contain the complete * encoding. If no copies were issued no source window is actually needed. This * prevents the VCDIFF header from including source base/len. xd3_emit_hdr checks * for srclen == 0. */ if (stream->enc_state == ENC_FLUSH && stream->match_maxaddr == 0) { goto done; } /* Check for overflow, srclen is usize_t - this can't happen unless XD3_DEFAULT_SRCBACK * and related parameters are extreme - should use smaller windows. */ length = stream->match_maxaddr - stream->match_minaddr; if (length > (xoff_t) USIZE_T_MAX) { stream->msg = "source window length overflow (not 64bit)"; return XD3_INTERNAL; } /* If ENC_FLUSH, then we know the exact source window to use because no more copies can * be issued. */ if (stream->enc_state == ENC_FLUSH) { src->srcbase = stream->match_minaddr; src->srclen = (usize_t) length; XD3_ASSERT (src->srclen); goto done; } /* Otherwise, we have to make a guess. More copies may still be issued, but we have to * decide the source window base and length now. */ src->srcbase = stream->match_minaddr; src->srclen = max ((usize_t) length, stream->avail_in + (stream->avail_in >> 2)); if (src->size < src->srcbase + (xoff_t) src->srclen) { /* Could reduce srcbase, as well. */ src->srclen = src->size - src->srcbase; } XD3_ASSERT (src->srclen); done: /* Set the taroff. This convenience variable is used even when stream->src == NULL. */ stream->taroff = src->srclen; return 0; } /* This function computes more source checksums to advance the window. * Called at every entrance to the string-match loop and each time * stream->input_position reaches the value returned as * *next_move_point. NB: this is one of the most expensive functions * in this code and also the most critical for good compression. * * TODO: really would like a good test for this logic. how? * TODO: optimize the inner loop */ static int xd3_srcwin_move_point (xd3_stream *stream, usize_t *next_move_point) { xoff_t logical_input_cksum_pos; XD3_ASSERT(stream->srcwin_cksum_pos <= stream->src->size); if (stream->srcwin_cksum_pos == stream->src->size) { *next_move_point = USIZE_T_MAX; return 0; } /* Begin by advancing at twice the input rate, up to half the * maximum window size. */ logical_input_cksum_pos = min((stream->total_in + stream->input_position) * 2, (stream->total_in + stream->input_position) + (stream->srcwin_maxsz / 2)); /* If srcwin_cksum_pos is already greater, wait until the difference * is met. */ if (stream->srcwin_cksum_pos > logical_input_cksum_pos) { *next_move_point = stream->input_position + (usize_t)(stream->srcwin_cksum_pos - logical_input_cksum_pos); return 0; } /* A long match may have extended past srcwin_cksum_pos. Don't * start checksumming already-matched source data. */ if (stream->maxsrcaddr > stream->srcwin_cksum_pos) { stream->srcwin_cksum_pos = stream->maxsrcaddr; } if (logical_input_cksum_pos < stream->srcwin_cksum_pos) { logical_input_cksum_pos = stream->srcwin_cksum_pos; } /* Advance at least one source block. With the command-line * defaults this means: * * if (src->size <= srcwin_maxsz), index the entire source at once * using the position of the first non-match. This is good for * small inputs, especially when the content may have moved anywhere * in the file (e.g., tar files). * * if (src->size > srcwin_maxsz), index at least one block (which * the command-line sets to 1/32 of srcwin_maxsz) ahead of the * logical position. This is good for different reasons: when a * long match spanning several source blocks is encountered, this * avoids computing checksums for those blocks. If the data can * move anywhere, this is bad. */ logical_input_cksum_pos += stream->src->blksize; IF_DEBUG1 (DP(RINT "[srcwin_move_point] T=%"Q"u S=%"Q"u/%"Q"u\n", stream->total_in + stream->input_position, stream->srcwin_cksum_pos, logical_input_cksum_pos)); while (stream->srcwin_cksum_pos < logical_input_cksum_pos && stream->srcwin_cksum_pos < stream->src->size) { xoff_t blkno = stream->srcwin_cksum_pos / stream->src->blksize; ssize_t oldpos = stream->srcwin_cksum_pos % stream->src->blksize; ssize_t blkpos = xd3_bytes_on_srcblk (stream->src, blkno); int ret; if (oldpos + stream->smatcher.large_look > blkpos) { stream->srcwin_cksum_pos = (blkno + 1) * stream->src->blksize; continue; } if ((ret = xd3_getblk (stream, blkno))) { /* TOOFARBACK should never occur here, since we read forward. */ if (ret == XD3_TOOFARBACK) { ret = XD3_INTERNAL; } return ret; } /* This inserts checksums for the entire block, in reverse, * starting from the end of the block. This logic does not test * stream->srcwin_cksum_pos because it always advances it to the * start of the next block. * * oldpos is the srcwin_cksum_pos within this block. blkpos is * the number of bytes available. Each iteration inspects * large_look bytes then steps back large_step bytes. The * if-stmt above ensures at least one large_look of data. */ blkpos -= stream->smatcher.large_look; do { uint32_t cksum = xd3_lcksum (stream->src->curblk + blkpos, stream->smatcher.large_look); usize_t hval = xd3_checksum_hash (& stream->large_hash, cksum); stream->large_table[hval] = (usize_t) ((stream->src->blksize * blkno) + (xoff_t)(blkpos + HASH_CKOFFSET)); IF_DEBUG (stream->large_ckcnt += 1); blkpos -= stream->smatcher.large_step; } while (blkpos >= oldpos); stream->srcwin_cksum_pos = (blkno + 1) * stream->src->blksize; } if (stream->srcwin_cksum_pos >= stream->src->size) { /* This invariant is needed for xd3_source_cksum_offset() */ stream->srcwin_cksum_pos = stream->src->size; *next_move_point = USIZE_T_MAX; return 0; } /* How long until this function should be called again. */ XD3_ASSERT(stream->srcwin_cksum_pos >= logical_input_cksum_pos); *next_move_point = stream->input_position + 1 + (usize_t)(stream->srcwin_cksum_pos - logical_input_cksum_pos); return 0; } /* Sets the bounding region for a newly discovered source match, prior to calling * xd3_source_extend_match(). This sets the match_maxfwd, match_maxback variables. Note: * srcpos is an absolute position (xoff_t) but the match_maxfwd, match_maxback variables * are usize_t. Returns 0 if the setup succeeds, or 1 if the source position lies outside * an already-decided srcbase/srclen window. */ static int xd3_source_match_setup (xd3_stream *stream, xoff_t srcpos) { xd3_source *src = stream->src; usize_t greedy_or_not; stream->match_maxback = 0; stream->match_maxfwd = 0; stream->match_back = 0; stream->match_fwd = 0; /* Going backwards, the 1.5-pass algorithm allows some already-matched input may be * covered by a longer source match. The greedy algorithm does not allow this. */ if (stream->flags & XD3_BEGREEDY) { /* The greedy algorithm allows backward matching to the last matched position. */ greedy_or_not = xd3_iopt_last_matched (stream); } else { /* The 1.5-pass algorithm allows backward matching to go back as far as the * unencoded offset, which is updated as instructions pass out of the iopt buffer. * If this (default) is chosen, it means xd3_iopt_erase may be called to eliminate * instructions when a covering source match is found. */ greedy_or_not = stream->unencoded_offset; } /* Backward target match limit. */ XD3_ASSERT (stream->input_position >= greedy_or_not); stream->match_maxback = stream->input_position - greedy_or_not; /* Forward target match limit. */ XD3_ASSERT (stream->avail_in > stream->input_position); stream->match_maxfwd = stream->avail_in - stream->input_position; /* Now we take the source position into account. It depends whether the srclen/srcbase * have been decided yet. */ if (stream->srcwin_decided == 0) { /* Unrestricted case: the match can cover the entire source, 0--src->size. We * compare the usize_t match_maxfwd/match_maxback against the xoff_t src->size/srcpos values * and take the min. */ xoff_t srcavail; if (srcpos < (xoff_t) stream->match_maxback) { stream->match_maxback = srcpos; } srcavail = src->size - srcpos; if (srcavail < (xoff_t) stream->match_maxfwd) { stream->match_maxfwd = srcavail; } goto good; } /* Decided some source window. */ XD3_ASSERT (src->srclen > 0); /* Restricted case: fail if the srcpos lies outside the source window */ if ((srcpos < src->srcbase) || (srcpos > (src->srcbase + (xoff_t) src->srclen))) { goto bad; } else { usize_t srcavail; srcavail = (usize_t) (srcpos - src->srcbase); if (srcavail < stream->match_maxback) { stream->match_maxback = srcavail; } srcavail = (usize_t) (src->srcbase + (xoff_t) src->srclen - srcpos); if (srcavail < stream->match_maxfwd) { stream->match_maxfwd = srcavail; } goto good; } good: stream->match_state = MATCH_BACKWARD; stream->match_srcpos = srcpos; return 0; bad: stream->match_state = MATCH_SEARCHING; return 1; } /* This function expands the source match backward and forward. It is reentrant, since * xd3_getblk may return XD3_GETSRCBLK, so most variables are kept in xd3_stream. There * are two callers of this function, the string_matching routine when a checksum match is * discovered, and xd3_encode_input whenever a continuing (or initial) match is suspected. * The two callers do different things with the input_position, thus this function leaves * that variable untouched. If a match is taken the resulting stream->match_fwd is left * non-zero. */ static int xd3_source_extend_match (xd3_stream *stream) { int ret; xd3_source *src = stream->src; xoff_t matchoff; /* matchoff is the current right/left-boundary of the source match being tested. */ usize_t streamoff; /* streamoff is the current right/left-boundary of the input match being tested. */ xoff_t tryblk; /* tryblk, tryoff are the block, offset position of matchoff */ usize_t tryoff; usize_t tryrem; /* tryrem is the number of matchable bytes on the source block */ XD3_ASSERT (src != NULL); /* Does it make sense to compute backward match AFTER forward match? */ if (stream->match_state == MATCH_BACKWARD) { /* Note: this code is practically duplicated below, substituting * match_fwd/match_back and direction. Consolidate? */ matchoff = stream->match_srcpos - stream->match_back; streamoff = stream->input_position - stream->match_back; tryblk = matchoff / src->blksize; tryoff = matchoff % src->blksize; /* this loops backward over source blocks */ while (stream->match_back < stream->match_maxback) { /* see if we're backing across a source block boundary */ if (tryoff == 0) { tryoff = src->blksize; tryblk -= 1; } if ((ret = xd3_getblk (stream, tryblk))) { /* if search went too far back, continue forward. */ if (ret == XD3_TOOFARBACK) { break; } /* could be a XD3_GETSRCBLK failure. */ return ret; } /* OPT: This code can be optimized. */ for (tryrem = min (tryoff, stream->match_maxback - stream->match_back); tryrem != 0; tryrem -= 1, stream->match_back += 1) { if (src->curblk[tryoff-1] != stream->next_in[streamoff-1]) { goto doneback; } tryoff -= 1; streamoff -= 1; } } doneback: stream->match_state = MATCH_FORWARD; } XD3_ASSERT (stream->match_state == MATCH_FORWARD); matchoff = stream->match_srcpos + stream->match_fwd; streamoff = stream->input_position + stream->match_fwd; tryblk = matchoff / src->blksize; tryoff = matchoff % src->blksize; /* Note: practically the same code as backwards case above: same comments */ while (stream->match_fwd < stream->match_maxfwd) { if ((ret = xd3_getblk (stream, tryblk))) { /* if search went too far back, continue forward. */ if (ret == XD3_TOOFARBACK) { break; } /* could be a XD3_GETSRCBLK failure. */ return ret; } /* There's a good speedup for doing word comparions: see zlib. */ for (tryrem = min(stream->match_maxfwd - stream->match_fwd, src->blksize - tryoff); tryrem != 0; tryrem -= 1, stream->match_fwd += 1) { if (src->curblk[tryoff] != stream->next_in[streamoff]) { goto donefwd; } tryoff += 1; streamoff += 1; } if (tryoff == src->blksize) { tryoff = 0; tryblk += 1; } } donefwd: stream->match_state = MATCH_SEARCHING; /* Now decide whether to take the match. There are several ways to answer this * question and this is likely the best answer. There is currently an assertion * in xd3_iopt_erase that checks whether min_match works. This variable maintains * that every match exceeds the end of the previous match. However, it is * possible that match_back allows us to find a match that goes a long way back * but not enough forward. We could try an alternate approach, which might help * or it might just be extra complexity: eliminate the next match_fwd >= min_match * test and call xd3_iopt_erase right away. Erase instructions as far as it goes * back, then either remember what was deleted and re-insert it, or count on the * string-matching algorithm to find that match again. I think it is more * worthwhile to implement large_hash duplicates. */ if (stream->match_fwd < stream->min_match) { stream->match_fwd = 0; } else { usize_t total = stream->match_fwd + stream->match_back; /* Correct the variables to remove match_back from the equation. */ usize_t target_position = stream->input_position - stream->match_back; usize_t match_length = stream->match_back + stream->match_fwd; xoff_t match_position = stream->match_srcpos - stream->match_back; xoff_t match_end = stream->match_srcpos + stream->match_fwd; /* At this point we may have to erase any iopt-buffer instructions that are * fully covered by a backward-extending copy. */ if (stream->match_back > 0) { xd3_iopt_erase (stream, target_position, total); } stream->match_back = 0; /* Update ranges. The first source match occurs with both values set to 0. */ if (stream->match_maxaddr == 0 || match_position < stream->match_minaddr) { stream->match_minaddr = match_position; } if (match_end > stream->match_maxaddr) { /* Note: per-window */ stream->match_maxaddr = match_end; } if (match_end > stream->maxsrcaddr) { /* Note: across windows */ stream->maxsrcaddr = match_end; } IF_DEBUG1 ({ static int x = 0; DP(RINT "[source match:%d] (%s) [ %u bytes ]\n", x++, stream->total_in + target_position, stream->total_in + target_position + match_length, match_position, match_position + match_length, (stream->total_in + target_position == match_position) ? "same" : "diff", match_length); }); if ((ret = xd3_found_match (stream, /* decoder position */ target_position, /* length */ match_length, /* address */ match_position, /* is_source */ 1))) { return ret; } /* If the match ends with the available input: */ if (target_position + match_length == stream->avail_in) { /* Setup continuing match for the next window. */ stream->match_state = MATCH_TARGET; stream->match_srcpos = match_end; } } return 0; } /* Update the small hash. Values in the small_table are offset by * HASH_CKOFFSET (1) to distinguish empty buckets from real offsets. */ static void xd3_scksum_insert (xd3_stream *stream, usize_t inx, usize_t scksum, usize_t pos) { /* If we are maintaining previous duplicates. */ if (stream->small_prev) { usize_t last_pos = stream->small_table[inx]; xd3_slist *pos_list = & stream->small_prev[pos & stream->sprevmask]; /* Note last_pos is offset by HASH_CKOFFSET. */ pos_list->last_pos = last_pos; } /* Enter the new position into the hash bucket. */ stream->small_table[inx] = pos + HASH_CKOFFSET; } #if XD3_DEBUG static int xd3_check_smatch (const uint8_t *ref0, const uint8_t *inp0, const uint8_t *inp_max, usize_t cmp_len) { int i; for (i = 0; i < cmp_len; i += 1) { XD3_ASSERT (ref0[i] == inp0[i]); } if (inp0 + cmp_len < inp_max) { XD3_ASSERT (inp0[i] != ref0[i]); } return 1; } #endif /* XD3_DEBUG */ /* When the hash table indicates a possible small string match, it * calls this routine to find the best match. The first matching * position is taken from the small_table, HASH_CKOFFSET is subtracted * to get the actual position. After checking that match, if previous * linked lists are in use (because stream->smatcher.small_chain > 1), * previous matches are tested searching for the longest match. If * (stream->min_match > MIN_MATCH) then a lazy match is in effect. * * TODO: This is the second most-expensive function, after * xd3_srcwin_move_point(). */ static usize_t xd3_smatch (xd3_stream *stream, usize_t base, usize_t scksum, usize_t *match_offset) { usize_t cmp_len; usize_t match_length = 0; usize_t chain = (stream->min_match == MIN_MATCH ? stream->smatcher.small_chain : stream->smatcher.small_lchain); const uint8_t *inp_max = stream->next_in + stream->avail_in; const uint8_t *inp; const uint8_t *ref; SMALL_HASH_DEBUG1 (stream, stream->next_in + stream->input_position); XD3_ASSERT (stream->min_match + stream->input_position <= stream->avail_in); base -= HASH_CKOFFSET; again: /* For small matches, we can always go to the end-of-input because * the matching position must be less than the input position. */ XD3_ASSERT (base < stream->input_position); ref = stream->next_in + base; inp = stream->next_in + stream->input_position; SMALL_HASH_DEBUG2 (stream, ref); /* Expand potential match forward. */ while (inp < inp_max && *inp == *ref) { ++inp; ++ref; } cmp_len = inp - (stream->next_in + stream->input_position); /* Verify correctness */ XD3_ASSERT (xd3_check_smatch (stream->next_in + base, stream->next_in + stream->input_position, inp_max, cmp_len)); /* Update longest match */ if (cmp_len > match_length) { ( match_length) = cmp_len; (*match_offset) = base; /* Stop if we match the entire input or have a long_enough match. */ if (inp == inp_max || cmp_len >= stream->smatcher.long_enough) { goto done; } } /* If we have not reached the chain limit, see if there is another previous position. */ while (--chain != 0) { /* Calculate the previous offset. */ usize_t last_pos = stream->small_prev[base & stream->sprevmask].last_pos; if (last_pos == 0) { break; } last_pos -= HASH_CKOFFSET; base = last_pos; /* Stop if the position is wrong (because the lists are not * re-initialized across input windows). */ if (base < stream->input_position) { goto again; } break; } done: return match_length; } #if XD3_DEBUG static void xd3_verify_small_state (xd3_stream *stream, const uint8_t *inp, uint32_t x_cksum) { uint32_t cksum = xd3_scksum (inp, stream->smatcher.small_look); XD3_ASSERT (cksum == x_cksum); } static void xd3_verify_large_state (xd3_stream *stream, const uint8_t *inp, uint32_t x_cksum) { uint32_t cksum = xd3_lcksum (inp, stream->smatcher.large_look); XD3_ASSERT (cksum == x_cksum); } static void xd3_verify_run_state (xd3_stream *stream, const uint8_t *inp, int x_run_l, uint8_t x_run_c) { int slook = stream->smatcher.small_look; uint8_t run_c; int run_l = xd3_comprun (inp, slook, &run_c); XD3_ASSERT (run_l == 0 || run_c == x_run_c); XD3_ASSERT (x_run_l > slook || run_l == x_run_l); } #endif /* XD3_DEBUG */ #endif /* XD3_ENCODER */ /****************************************************************************************** TEMPLATE pass ******************************************************************************************/ #endif /* __XDELTA3_C_INLINE_PASS__ */ #ifdef __XDELTA3_C_TEMPLATE_PASS__ #if XD3_ENCODER /****************************************************************************************** Templates ******************************************************************************************/ /* Template macros */ #define XD3_TEMPLATE(x) XD3_TEMPLATE2(x,TEMPLATE) #define XD3_TEMPLATE2(x,n) XD3_TEMPLATE3(x,n) #define XD3_TEMPLATE3(x,n) x ## n #define XD3_STRINGIFY(x) XD3_STRINGIFY2(x) #define XD3_STRINGIFY2(x) #x static int XD3_TEMPLATE(xd3_string_match_) (xd3_stream *stream); static const xd3_smatcher XD3_TEMPLATE(__smatcher_) = { XD3_STRINGIFY(TEMPLATE), XD3_TEMPLATE(xd3_string_match_), #if SOFTCFG == 1 0, 0, 0, 0, 0, 0, 0 #else LLOOK, LSTEP, SLOOK, SCHAIN, SLCHAIN, MAXLAZY, LONGENOUGH #endif }; static int XD3_TEMPLATE(xd3_string_match_) (xd3_stream *stream) { /* TODO config: These next three variables should be statically compliled in various * scan_cfg configurations? */ const int DO_SMALL = ! (stream->flags & XD3_NOCOMPRESS); const int DO_LARGE = (stream->src != NULL); const int DO_RUN = (1); const uint8_t *inp; uint32_t scksum = 0; uint32_t lcksum = 0; usize_t sinx; usize_t linx; uint8_t run_c; int run_l; int ret; usize_t match_length; usize_t match_offset; /* "may be unused" warnings are bogus (due to min_match test) */ usize_t next_move_point; /* If there will be no compression due to settings or short input, skip it entirely. */ if (! (DO_SMALL || DO_LARGE || DO_RUN) || stream->input_position + SLOOK > stream->avail_in) { goto loopnomore; } if ((ret = xd3_string_match_init (stream))) { return ret; } /* The restartloop label is reached when the incremental loop state needs to be * reset. */ restartloop: /* If there is not enough input remaining for any kind of match, skip it. */ if (stream->input_position + SLOOK > stream->avail_in) { goto loopnomore; } /* Now reset the incremental loop state: */ /* The min_match variable is updated to avoid matching the same lazy match over and over * again. For example, if you find a (small) match of length 9 at one position, you * will likely find a match of length 8 at the next position. */ stream->min_match = MIN_MATCH; /* The current input byte. */ inp = stream->next_in + stream->input_position; /* Small match state. */ if (DO_SMALL) { scksum = xd3_scksum (inp, SLOOK); } /* Run state. */ if (DO_RUN) { run_l = xd3_comprun (inp, SLOOK, & run_c); } /* Large match state. We continue the loop even after not enough bytes for LLOOK * remain, so always check stream->input_position in DO_LARGE code. */ if (DO_LARGE && (stream->input_position + LLOOK <= stream->avail_in)) { /* Source window: next_move_point is the point that stream->input_position must reach before * computing more source checksum. */ if ((ret = xd3_srcwin_move_point (stream, & next_move_point))) { return ret; } lcksum = xd3_lcksum (inp, LLOOK); } /* TRYLAZYLEN: True if a certain length match should be followed by lazy search. This * checks that LEN is shorter than MAXLAZY and that there is enough leftover data to * consider lazy matching. "Enough" is set to 2 since the next match will start at the * next offset, it must match two extra characters. */ #define TRYLAZYLEN(LEN,POS,MAX) ((MAXLAZY) > 0 && (LEN) < (MAXLAZY) && (POS) + (LEN) <= (MAX) - 2) /* HANDLELAZY: This statement is called each time an instruciton is emitted (three * cases). If the instruction is large enough, the loop is restarted, otherwise lazy * matching may ensue. */ #define HANDLELAZY(mlen) \ if (TRYLAZYLEN ((mlen), (stream->input_position), (stream->avail_in))) \ { stream->min_match = (mlen) + LEAST_MATCH_INCR; goto updateone; } \ else \ { stream->input_position += (mlen); goto restartloop; } /* Now loop over one input byte at a time until a match is found... */ for (;; inp += 1, stream->input_position += 1) { /* Now we try three kinds of string match in order of expense: * run, large match, small match. */ /* Expand the start of a RUN. The test for (run_l == SLOOK) avoids repeating this * check when we pass through a run area performing lazy matching. The run is only * expanded once when the min_match is first reached. If lazy matching is * performed, the run_l variable will remain inconsistent until the first * non-running input character is reached, at which time the run_l may then again * grow to SLOOK. */ if (DO_RUN && run_l == SLOOK) { usize_t max_len = stream->avail_in - stream->input_position; IF_DEBUG (xd3_verify_run_state (stream, inp, run_l, run_c)); while (run_l < max_len && inp[run_l] == run_c) { run_l += 1; } /* Output a RUN instruction. */ if (run_l >= stream->min_match && run_l >= MIN_RUN) { if ((ret = xd3_emit_run (stream, stream->input_position, run_l, run_c))) { return ret; } HANDLELAZY (run_l); } } /* If there is enough input remaining. */ if (DO_LARGE && (stream->input_position + LLOOK <= stream->avail_in)) { if ((stream->input_position >= next_move_point) && (ret = xd3_srcwin_move_point (stream, & next_move_point))) { return ret; } linx = xd3_checksum_hash (& stream->large_hash, lcksum); IF_DEBUG (xd3_verify_large_state (stream, inp, lcksum)); /* Note: To handle large checksum duplicates, this code should be rearranged to * resemble the small_match case more. But how much of the code can be truly * shared? The main difference is the need for xd3_source_extend_match to work * outside of xd3_string_match, in the case where inputs are identical. */ if (unlikely (stream->large_table[linx] != 0)) { /* the match_setup will fail if the source window has been decided and the * match lies outside it. You could consider forcing a window at this point * to permit a new source window. */ xoff_t adj_offset = xd3_source_cksum_offset(stream, stream->large_table[linx] - HASH_CKOFFSET); if (xd3_source_match_setup (stream, adj_offset) == 0) { if ((ret = xd3_source_extend_match (stream))) { return ret; } /* Update stream position. match_fwd is zero if no match. */ if (stream->match_fwd > 0) { HANDLELAZY (stream->match_fwd); } } } } /* Small matches. */ if (DO_SMALL) { sinx = xd3_checksum_hash (& stream->small_hash, scksum); /* Verify incremental state in debugging mode. */ IF_DEBUG (xd3_verify_small_state (stream, inp, scksum)); /* Search for the longest match */ if (unlikely (stream->small_table[sinx] != 0)) { match_length = xd3_smatch (stream, stream->small_table[sinx], scksum, & match_offset); } else { match_length = 0; } /* Insert a hash for this string. */ xd3_scksum_insert (stream, sinx, scksum, stream->input_position); /* Maybe output a COPY instruction */ if (unlikely (match_length >= stream->min_match)) { IF_DEBUG1 ({ static int x = 0; DP(RINT "[target match:%d] (-%d) [ %u bytes ]\n", x++, stream->input_position, stream->input_position + match_length, match_offset, match_offset + match_length, stream->input_position - match_offset, match_length); }); if ((ret = xd3_found_match (stream, /* decoder position */ stream->input_position, /* length */ match_length, /* address */ match_offset, /* is_source */ 0))) { return ret; } /* Copy instruction. */ HANDLELAZY (match_length); } } /* The logic above prevents excess work during lazy matching by increasing min_match * to avoid smaller matches. Each time we advance stream->input_position by one, the minimum match * shortens as well. */ if (stream->min_match > MIN_MATCH) { stream->min_match -= 1; } updateone: /* See if there are no more incremental cksums to compute. */ if (stream->input_position + SLOOK == stream->avail_in) { goto loopnomore; } /* Compute next RUN, CKSUM */ if (DO_RUN) { NEXTRUN (inp[SLOOK]); } if (DO_SMALL) { SMALL_CKSUM_UPDATE (scksum, inp, SLOOK); } if (DO_LARGE && (stream->input_position + LLOOK < stream->avail_in)) { LARGE_CKSUM_UPDATE (lcksum, inp, LLOOK); } } loopnomore: return 0; } #endif /* XD3_ENCODER */ #endif /* __XDELTA3_C_TEMPLATE_PASS__ */