/* * float.h * This file has no copyright assigned and is placed in the Public Domain. * This file is part of the mingw-runtime package. * No warranty is given; refer to the file DISCLAIMER.PD within the package. * * Constants related to floating point arithmetic. * * Also included here are some non-ANSI bits for accessing the floating * point controller. * */ #if defined(__LIBMSVCRT__) /* When building mingw-w64, this should be blank. */ #define _SECIMP #else #ifndef _SECIMP #define _SECIMP __declspec(dllimport) #endif /* _SECIMP */ #endif /* defined(_CRTBLD) || defined(__LIBMSVCRT__) */ #if (defined (__GNUC__) && defined (__GNUC_MINOR__)) \ || (defined(__clang__) && defined(__clang_major__)) #if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 6)) \ || (__clang_major__ >=3) #if !defined(_FLOAT_H___) && !defined(__FLOAT_H) && !defined(__CLANG_FLOAT_H) #include_next #endif #elif !defined (_FLOAT_H___) #if (__GNUC__ < 4) #error Corrupt install of gcc-s internal headers, or search order was changed. #else /* #include_next */ /* Number of decimal digits, q, such that any floating-point number with q decimal digits can be rounded into a floating-point number with p radix b digits and back again without change to the q decimal digits, p * log10(b) if b is a power of 10 floor((p - 1) * log10(b)) otherwise */ #undef FLT_DIG #undef DBL_DIG #undef LDBL_DIG #define FLT_DIG __FLT_DIG__ #define DBL_DIG __DBL_DIG__ #define LDBL_DIG __LDBL_DIG__ /* Maximum representable finite floating-point number, (1 - b**-p) * b**emax */ #undef FLT_MAX #undef DBL_MAX #undef LDBL_MAX #define FLT_MAX __FLT_MAX__ #define DBL_MAX __DBL_MAX__ #define LDBL_MAX __LDBL_MAX__ /* Minimum normalized positive floating-point number, b**(emin - 1). */ #undef FLT_MIN #undef DBL_MIN #undef LDBL_MIN #define FLT_MIN __FLT_MIN__ #define DBL_MIN __DBL_MIN__ #define LDBL_MIN __LDBL_MIN__ /* Needed for libjava building - Victor K. */ /* Radix of exponent representation, b. */ #undef FLT_RADIX #define FLT_RADIX __FLT_RADIX__ /* Minimum int x such that FLT_RADIX**(x-1) is a normalized float, emin */ #undef FLT_MIN_EXP #undef DBL_MIN_EXP #undef LDBL_MIN_EXP #define FLT_MIN_EXP __FLT_MIN_EXP__ #define DBL_MIN_EXP __DBL_MIN_EXP__ #define LDBL_MIN_EXP __LDBL_MIN_EXP__ /* Minimum negative integer such that 10 raised to that power is in the range of normalized floating-point numbers, ceil(log10(b) * (emin - 1)) */ #undef FLT_MIN_10_EXP #undef DBL_MIN_10_EXP #undef LDBL_MIN_10_EXP #define FLT_MIN_10_EXP __FLT_MIN_10_EXP__ #define DBL_MIN_10_EXP __DBL_MIN_10_EXP__ #define LDBL_MIN_10_EXP __LDBL_MIN_10_EXP__ /* Maximum int x such that FLT_RADIX**(x-1) is a representable float, emax. */ #undef FLT_MAX_EXP #undef DBL_MAX_EXP #undef LDBL_MAX_EXP #define FLT_MAX_EXP __FLT_MAX_EXP__ #define DBL_MAX_EXP __DBL_MAX_EXP__ #define LDBL_MAX_EXP __LDBL_MAX_EXP__ /* Maximum integer such that 10 raised to that power is in the range of representable finite floating-point numbers, floor(log10((1 - b**-p) * b**emax)) */ #undef FLT_MAX_10_EXP #undef DBL_MAX_10_EXP #undef LDBL_MAX_10_EXP #define FLT_MAX_10_EXP __FLT_MAX_10_EXP__ #define DBL_MAX_10_EXP __DBL_MAX_10_EXP__ #define LDBL_MAX_10_EXP __LDBL_MAX_10_EXP__ /* Addition rounds to 0: zero, 1: nearest, 2: +inf, 3: -inf, -1: unknown. */ /* ??? This is supposed to change with calls to fesetround in . */ #undef FLT_ROUNDS #define FLT_ROUNDS 1 #undef FLT_EPSILON #undef DBL_EPSILON #undef LDBL_EPSILON #define FLT_EPSILON __FLT_EPSILON__ #define DBL_EPSILON __DBL_EPSILON__ #define LDBL_EPSILON __LDBL_EPSILON__ #define _FLOAT_H___ #endif #endif #endif #ifndef _MINGW_FLOAT_H_ #define _MINGW_FLOAT_H_ /* All the headers include this file. */ #include /* * Functions and definitions for controlling the FPU. */ /* TODO: These constants are only valid for x86 machines */ /* Control word masks for unMask */ #define _MCW_DN 0x03000000 /* Denormal control */ #define _MCW_EM 0x0008001F /* Error masks */ #define _MCW_IC 0x00040000 /* Infinity */ #define _MCW_RC 0x00000300 /* Rounding */ #define _MCW_PC 0x00030000 /* Precision */ /* Number of base-FLT_RADIX digits in the significand, p. */ #undef FLT_MANT_DIG #undef DBL_MANT_DIG #undef LDBL_MANT_DIG #define FLT_MANT_DIG __FLT_MANT_DIG__ #define DBL_MANT_DIG __DBL_MANT_DIG__ #define LDBL_MANT_DIG __LDBL_MANT_DIG__ #if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L /* The floating-point expression evaluation method. -1 indeterminate 0 evaluate all operations and constants just to the range and precision of the type 1 evaluate operations and constants of type float and double to the range and precision of the double type, evaluate long double operations and constants to the range and precision of the long double type 2 evaluate all operations and constants to the range and precision of the long double type ??? This ought to change with the setting of the fp control word; the value provided by the compiler assumes the widest setting. */ #undef FLT_EVAL_METHOD #define FLT_EVAL_METHOD __FLT_EVAL_METHOD__ #endif /* C99 */ /* Control word values for unNew (use with related unMask above) */ #define _DN_SAVE 0x00000000 #define _DN_FLUSH 0x01000000 #define _EM_INVALID 0x00000010 #define _EM_DENORMAL 0x00080000 #define _EM_ZERODIVIDE 0x00000008 #define _EM_OVERFLOW 0x00000004 #define _EM_UNDERFLOW 0x00000002 #define _EM_INEXACT 0x00000001 #define _IC_AFFINE 0x00040000 #define _IC_PROJECTIVE 0x00000000 #define _RC_CHOP 0x00000300 #define _RC_UP 0x00000200 #define _RC_DOWN 0x00000100 #define _RC_NEAR 0x00000000 #define _PC_24 0x00020000 #define _PC_53 0x00010000 #define _PC_64 0x00000000 /* These are also defined in Mingw math.h, needed to work around GCC build issues. */ /* Return values for fpclass. */ #ifndef __MINGW_FPCLASS_DEFINED #define __MINGW_FPCLASS_DEFINED 1 #define _FPCLASS_SNAN 0x0001 /* Signaling "Not a Number" */ #define _FPCLASS_QNAN 0x0002 /* Quiet "Not a Number" */ #define _FPCLASS_NINF 0x0004 /* Negative Infinity */ #define _FPCLASS_NN 0x0008 /* Negative Normal */ #define _FPCLASS_ND 0x0010 /* Negative Denormal */ #define _FPCLASS_NZ 0x0020 /* Negative Zero */ #define _FPCLASS_PZ 0x0040 /* Positive Zero */ #define _FPCLASS_PD 0x0080 /* Positive Denormal */ #define _FPCLASS_PN 0x0100 /* Positive Normal */ #define _FPCLASS_PINF 0x0200 /* Positive Infinity */ #endif /* __MINGW_FPCLASS_DEFINED */ /* invalid subconditions (_SW_INVALID also set) */ #define _SW_UNEMULATED 0x0040 /* unemulated instruction */ #define _SW_SQRTNEG 0x0080 /* square root of a neg number */ #define _SW_STACKOVERFLOW 0x0200 /* FP stack overflow */ #define _SW_STACKUNDERFLOW 0x0400 /* FP stack underflow */ /* Floating point error signals and return codes */ #define _FPE_INVALID 0x81 #define _FPE_DENORMAL 0x82 #define _FPE_ZERODIVIDE 0x83 #define _FPE_OVERFLOW 0x84 #define _FPE_UNDERFLOW 0x85 #define _FPE_INEXACT 0x86 #define _FPE_UNEMULATED 0x87 #define _FPE_SQRTNEG 0x88 #define _FPE_STACKOVERFLOW 0x8a #define _FPE_STACKUNDERFLOW 0x8b #define _FPE_EXPLICITGEN 0x8c /* raise( SIGFPE ); */ #ifndef __STRICT_ANSI__ #define CW_DEFAULT _CW_DEFAULT #define MCW_PC _MCW_PC #define PC_24 _PC_24 #define PC_53 _PC_53 #define PC_64 _PC_64 #endif /* Not __STRICT_ANSI__ */ #if defined(__i386__) #define _CW_DEFAULT (_RC_NEAR+_PC_53+_EM_INVALID+_EM_ZERODIVIDE+_EM_OVERFLOW+_EM_UNDERFLOW+_EM_INEXACT+_EM_DENORMAL) #elif defined(__ia64__) #define _CW_DEFAULT (_RC_NEAR+_PC_64+_EM_INVALID+_EM_ZERODIVIDE+_EM_OVERFLOW+_EM_UNDERFLOW+_EM_INEXACT+_EM_DENORMAL) #elif defined(__x86_64__) #define _CW_DEFAULT (_RC_NEAR+_EM_INVALID+_EM_ZERODIVIDE+_EM_OVERFLOW+_EM_UNDERFLOW+_EM_INEXACT+_EM_DENORMAL) #endif #ifndef RC_INVOKED #ifdef __cplusplus extern "C" { #endif /* Set the FPU control word as cw = (cw & ~unMask) | (unNew & unMask), * i.e. change the bits in unMask to have the values they have in unNew, * leaving other bits unchanged. */ _CRTIMP unsigned int __cdecl __MINGW_NOTHROW _controlfp (unsigned int _NewValue, unsigned int _Mask) __MINGW_ATTRIB_DEPRECATED_SEC_WARN; _SECIMP errno_t __cdecl _controlfp_s(unsigned int *_CurrentState, unsigned int _NewValue, unsigned int _Mask); _CRTIMP unsigned int __cdecl __MINGW_NOTHROW _control87 (unsigned int _NewValue, unsigned int _Mask); _CRTIMP unsigned int __cdecl __MINGW_NOTHROW _clearfp (void); /* Clear the FPU status word */ _CRTIMP unsigned int __cdecl __MINGW_NOTHROW _statusfp (void); /* Report the FPU status word */ #define _clear87 _clearfp #define _status87 _statusfp /* MSVCRT.dll _fpreset initializes the control register to 0x27f, the status register to zero and the tag word to 0FFFFh. This differs from asm instruction finit/fninit which set control word to 0x37f (64 bit mantissa precison rather than 53 bit). By default, the mingw version of _fpreset sets fp control as per fninit. To use the MSVCRT.dll _fpreset, include CRT_fp8.o when building your application. */ void __cdecl __MINGW_NOTHROW _fpreset (void); #ifndef __STRICT_ANSI__ void __cdecl __MINGW_NOTHROW fpreset (void); #endif /* Not __STRICT_ANSI__ */ /* Global 'variable' for the current floating point error code. */ _CRTIMP int * __cdecl __MINGW_NOTHROW __fpecode(void); #define _fpecode (*(__fpecode())) /* * IEEE recommended functions. MS puts them in float.h * but they really belong in math.h. */ #ifndef _SIGN_DEFINED #define _SIGN_DEFINED _CRTIMP double __cdecl __MINGW_NOTHROW _chgsign (double _X); _CRTIMP double __cdecl __MINGW_NOTHROW _copysign (double _Number,double _Sign); _CRTIMP double __cdecl __MINGW_NOTHROW _logb (double); _CRTIMP double __cdecl __MINGW_NOTHROW _nextafter (double, double); _CRTIMP double __cdecl __MINGW_NOTHROW _scalb (double, long); _CRTIMP int __cdecl __MINGW_NOTHROW _finite (double); _CRTIMP int __cdecl __MINGW_NOTHROW _fpclass (double); _CRTIMP int __cdecl __MINGW_NOTHROW _isnan (double); #define _copysignl copysignl extern long double __cdecl _chgsignl (long double); #endif /* _SIGN_DEFINED */ #ifdef __cplusplus } #endif #endif /* Not RC_INVOKED */ #endif /* _MINGW_FLOAT_H_ */